MICRO SWITCH™ premium large snap-action series are designed for repeatability and enhanced life. These series of precision switches feature application-specific characteristics. From double-break circuitry to handling very high loads, MICRO SWITCH™ premium large snap-action series are suitable for a variety of applications.
DT Series switches consist of two independent single-pole double throw circuits in one housing actuated by one actuator. The terminals are separated by a non-conductive shield to reduce shorting.
MT Series magnetic blow-out switches are designed to switch high-capacity (125 Vdc/250 Vdc) systems. An integral magnet around the contact gap protects the contacts by deflecting the arc. Vents between the cover and housing allow the hot gas to escape.
Easy to gang mount, MN Series twin-break circuit type switches are for use with limit or control mechanisms on machine tools, presses, or other industrial equipment.
MICRO SWITCH™ TB Series miniature double-break basic switches are basic double-break units that offer a means of controlling isolated circuits. Each circuit may be driven by an independent voltage source.
MICRO SWITCH™ BZ/BA/BM/BE Series are often used for precision on/off applications, as well as end of limit, presence/absence, and manual operator interface functions. Their engineering design meets most applications needs. Configuration options with BM, BA and BE switches give a broader range of operating and interface characteristics.
The MICRO SWITCH™ 6AS Series consists of two large premium BZ/BA/BM/BE snap-action switches ganged together and actuated by a single actuator. Field adjustable operating point is an option for one or both switches.
Honeywell Sensing and Control MICRO SWITCH Premium Large Snap-Action Switches
No comments:
Post a Comment