The Banner Engineering UM-FA-..A Universal Safety Module is used to increase the control reliability and safety integrity of a circuit and devices. The safety module is designed to monitor a 1-channel or 2-channel safety switches (e.g., E-stop or safety interlocking switches) or a 1-channel or 2-channel PNP output from devices such as a safety laser scanner (e.g. AG4-4E).
Features
- Monitors a wide variety of safety and non-safety input devices:
- Optical-based safeguarding devices, such as Safety Laser Scanners
- Positive-opening safety switches used for guard interlocking
- Emergency-stop devices, such as palm buttons and rope/cable pulls
- Standard sensors for non-safety applications, such as photoelectric monitoring position or end-of-travel
- The safety inputs can monitor (selectable via DIP switch):
- +24V dc solid-state (PNP) outputs in single-channel or dual-channel hookup,
- +24V dc source that is switched by hard/relay contacts in single-channel or dual-channel hookup, or
- Hard/relay contacts in a dual-channel hookup using terminals S11-S12 and S21-S2
- Automatic reset or monitored manual reset, depending on hookup
- Design complies with standards ANSI B11.19, UL991, ISO 13850 (EN418), and ISO 13849-1 (EN954-1)
- Safety Integrity Level (SIL) 3 (IEC 61508/62061)
- Category 4, Performance level (PL) e (ISO 13849-1)
- For use in functional stop category 0 applications per ANSI NFPA 79 and IEC/EN 60204-1
- Plug-in terminal blocks
- 24V ac/dc operation
No comments:
Post a Comment