Phoenix Contact PTVME 6/S Test Disconnect Block

The PTVME 6/S test disconnect terminal blocks from Phoenix Contact short out circuits tied to current transformers or transducers to enable tests and measurement readings.

 
FEATURES

• Features a simple, touch-safe method to actuate the disconnect lever.
• Conductor side-entry allows for clear marking and wire identification.
• Push-in connection delivers fast, reliable, and safe operation of test disconnects.
• 600V, 30A, 26-10AWG per UL recognition; Available in gray, blue, red, green, and yellow.

Phoenix Contact PTVME 6/S Test Disconnect Block

Phoenix Contact Technical Datasheets

Opto 22 GRV-MM1001-10 I/O Module

 

Opto 22’s new GRV-MM1001-10 module for its groov edge programmable industrial controller provides engineers the flexibility to quickly connect most traditional I/O signals or circuits without specifying precise sensing requirements in advance.

FEATURES  

• Software-configurable universal I/O module accepts more than a dozen signal types.
• Features 10 channels per module: 8 multifunction, mixed signal; 2 mechanical relays.
• Supports more than 200,000 unique I/O configurations via eight multifunction, multi-signal I/O channels, including thermocouples (TCs), integrated circuit temperature devices (ICTDs), and thermistors/resistors.
• Features signal-quality indicators and intelligent functions such as scaling, averaging, and totaling.

Opto 22 GRV-MM1001-10 I/O Module
Opto 22 Technical Datasheets

Phoenix Contact RIFLINE Relay

Phoenix Contact’s RIFLINE family of pluggable force-guided relays has expanded to include 4-pole designs in a narrow, space-saving design.

FEATURES

• Increased safety with force-guided contacts in accordance with EN50205.
• Integrated status LED and freewheeling diode.
• Switching currents up to 4 x 6A.
• Available in a 2N/O + 2N/C or 3N/O + 1N/C contact arrangement.

Phoenix Contact RIFLINE Relay

Phoenix Contact Technical Datasheets

Banner Engineering DXMR90 Industrial Controller

The new DXMR90 industrial controller from Banner Engineering combines sensor signals into a unified data stream.

FEATURES  

• Contains individual Modbus Clients enabling concurrent communication to up to five independent serial networks.
• Converts Modbus RTU to Modbus TCP/IP, Ethernet I/P, or Profinet.
• Features four female M12 ports, which can receive native Modbus signals or can be connected to Banner radios to receive wireless signals from as far as six miles away.
• Ideal for Industrial Internet of Things data analytics, condition monitoring, predictive maintenance, OEE analysis, diagnostics, and troubleshooting.

Banner Engineering DXMR90 Industrial Controller

Banner Engineering Technical Datasheets

Opto 22 GRV-IVAPM-3 Power Monitoring Module

Opto 22 announces the GRV-IVAPM-3 I/O module for its groov edge programmable industrial controller.

FEATURES  

• Captures Category III AC voltage, current, energy, and power measurements.
• Facilitates preventive and predictive maintenance and energy optimization cost-saving initiatives.
• Separately measures up to three different single-phase brand circuits from the same service or a single 3-phase wye (up to 400VAC) or delta (up to 600VAC) circuit.
• Accumulated values are preserved in non-volatile memory every 30 seconds to survive power interruption, and signal accuracy can be tuned for each phase using the minimum voltage threshold ratio, minimum current threshold ratio, and power creep adjustment properties.

Opto 22 GRV-IVAPM-3 I/O Module

Opto 22 Technical Datasheets

Phoenix Contact Axioline P Modular Proxy

The Axioline P modular proxy from Phoenix Contact combines two major functions: modular connectivity to various networks and protocols, as well as the ability to add additional standard and intrinsically safe I/O.

FEATURES  

• Modular proxy enables up to 8 PROFIBUS PA segments to the available AF bus interface.
• Digital I/O supports NAMUR sensor types ideal for intrinsically safe environments; Analog modules can activate HART communication if supported.
• Minimizes rail usage and reduces Ethernet nodes communicating back to the Distributed Control System.
• Modular block design is easy to customize; select and use only the necessary components.
• Reliability assured and supported for S2, R1, and R2 system redundancy; CE, UL, EX, Marine, and Class A certifications.

Phoenix Contact Axioline P Modular Proxy

Phoenix Contact Technical Datasheets

Banner Engineering Mini-Array Basic Light Sensor

Banner Engineering’s new Mini-Array Basic light curtain is a streamlined, affordable light sensor.

FEATURES

• Includes a pair of sensor emitter/receiver arrays configured for material handling and logistics applications; an auto-streaming feature automatically transmits measurement data without the need for a separate controller.
• Features sensors with a 2m-detection range, with beams spaced 19.1mm apart.
• Can be set to straight or interlaced scanning patterns to optimize speed or the resolution of the detection field.
• A budget-conscious solution for box profiling, edge guiding, parts ejection, and hole detection applications.
• Available with array lengths from 150mm to 1210mm, in 150mm increments.

Banner Engineering Mini-Array Basic Light Sensor

Banner Engineering Technical Datasheets

Carlo Gavazzi SPMA Series Power Supplies

The new SPMA Series Power Supplies from Carlo Gavazzi have a low-profile design that is just 63mm deep.

FEATURES

• Ideal for automotive battery chargers and high efficiency applications requiring a wide operating ambient temperature.
• This compact DIN-mount solution is available in three frame sizes from 17.5mm to 70mm.
• Comes with 4kVac isolation voltage for use in electric vehicle charging stations.
• Available with an optional conformal coating to protect its electronic circuits from harsh environments.

Carlo Gavazzi SPMA Series Power Supplies

Carlo Gavazzi Technical Datasheets

Banner Engineering Q45DPSD Wireless Differential Pressure Sensor

Banner Engineering introduces the newest member of its Q45 line, the Q45DPSD Wireless Differential Pressure Sensor.

FEATURES

• Measures the differential between the high and low side of a pneumatic system, such as air flow through a filter.
• Transmits data to a wireless DXM Controller or Performance Gateway for remote monitoring of critical systems.
• Includes installation tubing as well as an industrial wireless transmitter, reducing the need for multiple components.
• Ideal for predictive maintenance of HVAC air filters, quality control for volumetric flow measurement, clean rooms, laboratory rooms, and hospitals.

Banner Engineering Q45DPSD Wireless Differential Pressure Sensor

Banner Engineering Technical Datasheets

Banner Engineering SX5-B6 Safety Laser Scanner

The Banner Engineering SX5-B6 is a standalone safety laser scanner that protects personnel and equipment within a user-defined region.

FEATURES

• A 275° continuous scanning area creates a two-dimensional protected zone around a potential hazard or obstruction.
• Horizontal or vertical mounting provides flexible implementation, including attachment to automated guided vehicles and to monitor spaces around corners.
• Customizable to 30mm, 40mm, 50mm, 70mm, or 150mm detection resolutions to detect or ignore objects of various sizes.
• Ideal for safeguarding work areas such as robot weld cells, conveyors, and zone switching for forklift access.

Banner Engineering SX5-B6 Safety Laser Scanner

Banner Engineering Technical Datasheets

Phoenix Contact CONTACTRON Speed Starter

Phoenix Contact’s CONTACTRON Speed Starter offers the most critical functions of a variable frequency drive without the complexity or experience needed to program and commission a drive.

FEATURES

• Features a rotary knob and push-button interface that enables rapid commissioning without software or a computer, including two user-settable output speeds from 0Hz–500Hz.
• Offers the ability to control motor ramp-up and ramp-down times while operating under torque.
• Integrated Safe Torque Off (STO) provides emergency stop capabilities up to SIL3/PLe when used in conjunction with a suitable safety relay or safe PLC.
• Slim 35mm form factor maximizes cabinet space.
• Available with single- and three-phase input options; designed to work with three-phase asynchronous motors up to 2HP.

Phoenix Contact CONTACTRON Speed Starter
Phoenix Contact Technical Datasheets

E-T-A CPC12 Bus Controller

E-T-A expands its REX12D-T Power Distribution and Protection system to include the new CPC12 Bus Controller with EtherNet/IP, PROFINET, Modbus TCP, and EtherCAT field bus interfaces.

FEATURES

• Collects status information as well as measuring values of the connected circuit protectors.
• Increases machine uptime through clear failure detection and quick error resolution.
• Uses a separate 24V DC power supply and enables independent supply of the circuit protectors.
• Designed to work with E-T-A’s REX12D system meets all requirements for the machine construction and process control industry.

E-T-A CPC12 Bus Controller

E-T-A Technical Datasheets

Red Lion Controls PM-50 Graphical Panel Meter

The Red Lion Controls PM-50 graphical panel meter delivers enhanced workflow and process insights from the plant floor.

FEATURES

• Full-color touchscreen provides a customizable graphical interface that illustrates information for easy understanding.
• Simple plug-and-play integration with existing 1/8 or 1/16 DIN panel cutout wiring.
• Connects via on-board wi-fi and RS-485/Modbus, as well as optional Ethernet or RS-232.
• Field-installable modules add Dual Form C Relay, Quad Form A Relay, retransmitted analog output (4mA to 20mA/ 0VDC to 10VDC), and AC power.
• Android and iOS app enables simple programming and remote monitoring.
• Available with a 3.5” or 4.3” display.

Red Lion Controls PM-50 Graphical Panel Meter

Red Lion Controls Technical Datasheets

Phoenix Contact 6mm² PTV Terminal Blocks

Phoenix Contact’s PTV family of connectors now offers a 6mm² portfolio that accepts wires up to 8 AWG.

FEATURES

• The PTV terminal block range combines the advantages of tool-free Push-in connection with lateral screw terminal block conductor routing.
• Easily identifiable connection and conductor marking via lateral conductor routing.
• Clearly arranged wiring without bending radii.
• The 6mm² blocks are UL Recognized to 600 volts, 40 amps, and offer a 20-8 AWG wire range, and available in multiple colors and with a variety of connection-point options.

Phoenix Contact 6mm² PTV Terminal Blocks

Phoenix Contact Technical Datasheets

Bussmann by Eaton 400A CCP Branch-Circuit Disconnect

Bussmann by Eaton extends its CCP series of UL 98 Listed fused, branch-circuit disconnects with a new 400A version.

FEATURES

• The CCP series offers the smallest footprint compared to other Class J disconnect solutions, requiring up to 69% less space.
• Rotary operated versions provide through-the-door and through-the-side operation flexibility for enhanced safety.
• Ideal for industrial control panels, machinery, and HVAC applications.
• Multi-wire lug kits with terminal shrouds reduce wire connection and control panel components by allowing for power distribution to multiple loads.
• Optional selector and pistol handles available with rotary operated versions.

Bussmann by Eaton 400A CCP Branch-Circuit Disconnect

Bussmann by Eaton Technical Datasheets

Banner Engineering TL50 Pro Select Programmable Tower Lights

Banner Engineering expands its 50mm tower light portfolio with the TL50 Pro Select Programmable Tower Lights.

FEATURES

• Lighted segments stand out to provide easy-to-see operator guidance and indication of equipment status, as well as time elapsed, temperature, position, angle, or other “analog” signal types.
• Simple configuration through Pro Editor software or IO-Link compatibility.
• Available in three- or four-segment designs, as well as with an omni-directional audible alarm.
• 12V DC or 30V DC operation.

Banner Engineering TL50 Pro Select Programmable Tower Lights

Banner Engineering Technical Datasheets

Pepperl+Fuchs USi-Safety Ultrasonic Sensor System

The Pepperl+Fuchs USi-Safety Ultrasonic Sensor System protects machines and vehicles in challenging environments.

 
FEATURES

• Up to two detached IP69K ultrasonic sensor units can be connected to the system, plus an additional temperature sensor.
• Ultrasonic technology detects wood, metal, plastic, and people, as well as colored, reflective, or transparent objects; unlike photoelectric sensors, ultrasonic sensors are not tripped by dust and other airborne particles.
• Opening angles of ±17°/±5° creates a wide sensing range in one plane and a narrow sensing range in the other, creating an elliptical detection field that can be used just above a floor or close to a wall.
• Ideal for forklift-collision avoidance, machine/system safeguarding, and automated guided vehicle collision and personal safety.

Pepperl+Fuchs USi-Safety Ultrasonic Sensor System

Pepperl+Fuchs Technical Datasheets

Schneider Electric PowerPacT Circuit Breakers

Schneider Electric announces a new evolution to its PowerPacT line of circuit breakers that protect electrical systems from damage caused by overloads and short circuits.

FEATURES

• A new semi-transparent window enables easy visual inspection of internal accessories.
• QR code enables quick scanning for vital information.
• Flexible current range from 15A to 3000A; interrupting ratings include 18kA through 200kA @ 480VAC.
• The PowerPacT circuit breakers integrate these new features while maintain its popular form, fit, and function, with no change to catalog numbers or reference numbers.
• Available with thermal-magnetic or Micrologic electronic trip units.

Schneider Electric PowerPacT Circuit Breakers

Schneider Electric Technical Datasheets

Banner Engineering Sure Cross H10 MultiHop Data Radio

Banner Engineering has updated its Sure Cross H10 MultiHop Data Radio to now include a vented enclosure.

FEATURES

• Eliminates condensation buildup in environments with transitions between hot and cold temperatures.
• Ideal for vibration and temperature monitoring for predictive maintenance on motor health, ultrasonic distance measurement for tank-level monitoring, and temperature and humidity monitoring for energy management.
• Includes two pigtail connectors at the bottom for power and sensor input, with opposite genders to eliminate potential mix ups.
• Extends the range of Modbus or other serial communication networks, while also eliminating the need for wiring runs.

Banner Engineering H10 MultiHop Data Radio

Banner Engineering Technical Datasheets

Phoenix Contact DCS Displays and Keypads

Phoenix Contact introduces the DCS line of displays and membrane keypads to accompany a range of its existing enclosures.

FEATURES  

• Sized and integrated directly into Phoenix Contact device enclosures to eliminate guesswork in picking a display, third-party costs to modify the enclosure, and additional vendor management.
• Designed for a flush, clean finish without compromising the structural integrity of the enclosure.
• Available as a smaller display with a membrane keypad or a larger touchscreen.
• Fits the Phoenix Contact ICS 25 series and ICS 50 series (2.4” and 0.96” displays), UCS embedded system products (2.4” display), and MEIO 56.4 (2.4” display).

Phoenix Contact DCS Displays and Keypads

Phoenix Contact Technical Datasheets

Phoenix Contact 2000 Series of Ethernet Switches

Phoenix Contact expands its 2000 Series of managed switches with new models featuring downward-facing ports in a metal housing, IP67 rating, and a special purpose model featuring a flat profile.

FEATURES

• The 2400/2500 models offer a metal housing and downward port direction for use in low-profile control cabinets.
• The FL Switch 2600/2700 devices offer IP67 protection, a narrow 60mm width, and M12 connections that enable both the use of classic M12 connectors with screw connection and Phoenix Contact’s M12 Push-Pull fast locking system.
• The 2000F series switches are ideal for space-saving control cabinets due to their slim 25.5mm depth above the DIN rail.
• EtherNet/IP and PROFINET specific functions and preconfigured PROFINET versions are suitable for use in PROFINET Class A/B networks, as well as EtherNet/IP installations.
• Configuration options include the Mode button, web-based management, SD card, SNMP, CLI, or PROFINET. A wide range of redundancy protocols such as RSTP, MRP, and LACP are also supported, enabling a failsafe network infrastructure.

Phoenix Contact 2000 Series of Ethernet Switches

Phoenix Contact Technical Datasheets

Banner Engineering EZ-Array Sensor

Banner Engineering has updated its EZ-Array sensor with IO-Link 1.1.

FEATURES

• Enables users to access Active Measurement 1 and 2, individual beam states, or all measurement modes as process data.
• IO-Link 1.1 reads parameter data 8x faster than version 1.0.
• Features closely spaced infrared beams that detect objects as small as 5mm.
• Offers automatic device replacement for quick device configuration—simply plug in an EZ-Array to the IO-Link master and the configuration will be automatically loaded onto it.
• Applications include edge and center-guiding, loop-tension control, hole sizing, parts counting, and on-the-fly product sizing and profiling.

Banner Engineering EZ-Array Sensor

Banner Engineering Technical Datasheets

Banner Engineering S15C/R45C Snap Signal Converters

Banner Engineering is expanding its line of plug-and-play in-line converters to easily incorporate existing legacy sensors into standard protocols to enable process monitoring.

FEATURES

• The S15C and R45C converters take various types of signals such as discrete, analog, and RTD and convert them to smart protocols like IO-Link, PICK-IQ, and Modbus.
• The S15C is designed to connect directly to a sensor, indicator, or other device and begin operating immediately.
• The R45C enables discrete sensors to be added to PICK-IQ and Modbus networks, enhancing pick-to-light installations and delivering the data needed for predictive maintenance and operational improvements.
• Both have rugged, over-molded designs that meet IP65, IP67, and IP68 standards.

Banner Engineering S15C/R45C Snap Signal Converters

Banner Engineering Technical Datasheets

Banner Engineering R70 Serial Data Radio

Banner Engineering’s new R70 Serial Data Radio extends the range of serial networks and supports RS485 communications.

FEATURES  

• Designed with a 70mm housing with twist-off cover, DIP switch settings for fast configuration, and a connectorized base for quick deployment.
• The radio’s small size enables flexible mounting options using 30mm mounting brackets, making it an affordable solution for high-density repeater networks.
• To simplify ordering, the R70 can be set up as a master, repeater, or slave.
• 900MHz and 2.4GHz options available.

Banner Engineering R70 Serial Data Radio

Banner Engineering Technical Datasheets

Phoenix Contact Smart Camera Boxes

Phoenix Contact’s smart camera box line features rugged enclosures that protect essential components for remote video monitoring applications.

FEATURES

• The smart camera boxes include power, a PoE switch, cable management, surge protection, and additional DIN rail for system flexibility.
• Ideal for perimeter security, parking lots, highway and traffic monitoring, and asset monitoring.
• Provides a wide range of alarm messages via SNMP, such as in the event of sabotage attempts or defective surge protection.
• IK10-rated, tamper-proof IP65/67 enclosure.
• Power budget of 90W per port, total budget of 165W.
• Available with fiber and copper variants.

Phoenix Contact Smart Camera Boxes

Phoenix Contact Technical Datasheets

Phoenix Contact FL WLAN 1011/2011 Compact Radios

Phoenix Contact introduces new FL WLAN 1011/2011 compact radios that can mount to a panel or on a DIN rail for maximum space savings.

FEATURES

• Supports access point or client modes.
• Configurable via web manager, command line, or REST APIs.
• 1:1 NAT, IP masquerading and port-forwarding capabilities as a client.
• Client compatibility with all third-party access points.
• FL WLAN 2011 offers MESH functionality that enables the creation of a private secure wireless network when existing infrastructure is not available.

Phoenix Contact FL WLAN 1011/2011 Compact Radios

Phoenix Contact Technical Datasheets

Phoenix Contact TRIO IP67 Power Supplies

Phoenix Contact’s TRIO IP67 power supplies eliminate the restrictions of a control cabinet to put power where it’s needed.

FEATURES  

• IP67 power supplies can be mounted directly to a machine, reducing cable length and the voltage drop that can occur with longer cables.
• Provides a dynamic power boost of up to 150% of the nominal current for up to five seconds.
• Ideal for material handling, conveyors and sorting systems, and lighting controls.
• Local DC and AC OK LEDs on the front of the power supply and DC OK floating signal contact simplify power monitoring.
• Offered in single-phase, 24VDC/8A and 24VDC/10A variants.

Phoenix Contact TRIO IP67 Power Supplies
Phoenix Contact Technical Datasheets

Phoenix Contact FQ Series of Board-to-Board Connectors

Phoenix Contact launches its FQ series of cost-optimized board-to-board connectors.

FEATURES

• Provides reliable mechanical and electrical connections using a double-sided contact system.
• Pin and socket-style connectors enable mezzanine, coplanar, and mother-daughter connections to be easily implemented.
• The FQ 1.27 is available in vertical configurations and is supplied in tape-and-reel packaging.
• The FQ 2.54 is available in vertical and horizontal configurations and is supplied in a magazine.

Phoenix Contact FQ Series of Board-to-Board Connectors

Phoenix Contact Technical Datasheets

Phoenix Contact CCS C-Line of DC Charging Cables

Phoenix Contact introduces the new CCS C-Line of DC charge cables for electric vehicles.

FEATURES

• The lightweight connector is designed to CCS standards but in a smaller form for easier handling and storage.
• Ideal for locations where high-charge power is not needed but DC charging is preferred over AC, such as residences, apartment complexes, parking facilities, and businesses.
• Capable of handling up to 80 amps, reducing charge time compared to AC charge cables.
• Available as Type 1 for North America and Type 2 for Europe.

Phoenix Contact CCS C-Line DC Charging Cables

Phoenix Contact Technical Datasheets

Banner Engineering QT50 Radar Sensor

Banner Engineering now offers its QT50R Radar Sensor with a smaller dead zone and a new 0–10V analog output option to measure an object’s position.

FEATURES

• Uses a 90°x76°-angle beam, with an adjustable sensing field to ignore objects beyond a setpoint.
• Objects can be measured out to 24 meters and detected as close as 0.5 meters from the sensor.
• Ideal for collision avoidance in mobile equipment such as reach stackers, forklifts, and mining vehicles.
• Rugged IP67 housing enables use in harsh outdoor applications, and its sensing functions are unaffected by wind, falling rain and snow, fog, and light.

Banner Engineering QT50 Radar Sensor

Banner Engineering Technical Datasheets

Banner Engineering Q5X Laser Sensor

Banner Engineering’s Q5X Laser Sensors now have an increased range up to 3 meters.

FEATURES

• Uses increased excess gain to easily identify traditionally challenging targets.
• Incorporates analog and discrete outputs.
• Reliable detection of black targets against a black background, black targets against a shiny metal background, clear and reflective objects, multicolor packaging, and targets of all colors.
• Available in 0-10V or 4-20mA models.

Banner Engineering Q5X Laser Sensor

Banner Engineering Technical Datasheets

Banner Engineering T30R Radar Sensor

Banner Engineering’s T30R Radar Sensor now comes with a wider-angle 45°x45° beam pattern to better detect curved surfaces and larger targets.

FEATURES

• Provides reliable detection of high-dielectric targets like metal or large amounts of water, as well as lower-dielectric materials like wood, rock, or organic materials.
• Unaffected by rain, wind, snow, fog, steam, sunlight, and has an operating temperature of -40° to +65°C.
• Radar Configuration Software, IO-Link, remote teach input, and push buttons for flexible set-up and configuration.
• Compact, IP67 rated housing for use in challenging environments.

Banner Engineering T30R Radar Sensor

Banner Engineering Technical Datasheets

Phoenix Contact DMCC 0.5 Series Shielded PCB Connectors

The new DMCC 0.5 series from Phoenix Contact extends its existing portfolio of shielded PCB connectors with a pitch of 2.54mm.

 
FEATURES

• The featured EMC shielding enables the reliable supply of data and power to devices, even via a single Ethernet cable.
• Ideal for light barriers, proximity switches, rotary encoders, sensors, and cameras.
• Gold-plated contacts enable optimal transmission quality with long-term stability.
• Available in packaging for automated pick-and-place assembly.
• Optional tool for manual and automated crimping.

Phoenix Contact DMCC 0.5 Series Shielded PCB Connectors

Phoenix Contact Technical Datasheets

Phoenix Contact Vehicle AC Charging Inlets

Phoenix Contact introduces its new CHARX Generation 4 universal vehicle AC charging inlets.

FEATURES

• Ideal solution for any type of electric vehicle where DC charging is not needed.
• Meets the standard requirements for Type 1, North America and Type 2, Europe.
• Both Type 1 and Type 2 inlets have uniform dimensional characteristics enabling a single mounting configuration for vehicle manufacturers.
• Inlets are fully assembled, including locking actuator, temperature sensors, and dust caps, and have a standard 2-meter power cable with other options available.

Phoenix Contact CHARX Vehicle AC Charging Inlet
Phoenix Contact Technical Datasheets

Banner Engineering Q45VAC All-in-One C-Cell Vibration Sensor

Banner Engineering’s Wireless Q45VAC All-in-One C-Cell Vibration and Temperature Sensor extends battery life to three years.

FEATURES

• This industrial, battery-powered device analyzes vibration and temperature data to identify and predict failures in rotating machinery.
• Ideal for such equipment as motors, pumps, rotary compressors, exhaust or HVAC fan motors, and spindles.
• This unit combines sensors with a wireless node and battery power supply in a single, compact device.
• The All-in-One composition eliminates the cost of ordering and installing separate components.

Banner Engineering Wireless Q45VAC All-in-One C-Cell Vibration and Temperature Sensor

Banner Engineering Technical Datasheets

Banner Engineering Q45VTPD D-Cell Vibration & Temperature Node

Banner Engineering launches the Q45VTPD, a D-cell powered version of its Q45VTP wireless vibration and temperature node.

FEATURES

• Wirelessly communicates with any Sure Cross Performance Gateway and mounts on a variety of machines to analyze vibration data and identify and predict failures in rotating machinery.
• Uses DIP switches to allow multiple configuration options for the vibration characteristics being monitored by Banner’s QM30VT1 vibration and temperature sensor.
• The D-cell extends battery life to four years.
• Available with (Q45VTPD) and without (Q45VTPD NB) D-cell battery.

Banner Engineering Q45VTPD D-Cell Vibration & Temperature Node

Banner Engineering Technical Datasheets

Banner Engineering SI-GL42 Switches

Banner SI-GL42 Safety Locking Switches ensure that safety gates, safety doors, and other protective guards remain closed for as long as a hazardous situation exists.

FEATURES

• Composed of a lightweight glass-reinforced thermoplastic housing with metal components in mechanically stressed areas.
• Actuator head rotates in 90° increments to accommodate five positions, including vertical.
• Available in two locking mechanism types: Spring lock with energized solenoid release, or energized solenoid lock with spring release.
• Multiple actuator and monitoring contact configurations for any automation safety application.
• Activated locks can be manually unlocked if machines need to be accessed for maintenance or repair.

Banner Engineering SI-GL42 Switches

Banner Engineering Technical Datasheets

Banner Engineering Q45 All-in-One D-Cell Photoelectric Sensor Nodes

Banner Engineering extends its Q45 line of all-in-one photoelectric sensor nodes with a new D-cell battery version.

FEATURES

• Provides four years of maintenance-free service, double the battery life of existing versions with smaller batteries.
• The Q45 sensors are self-contained units for coordinating multiple machines in part-counting, as well as OEE applications.
• Each model combines a sensor, wireless node, and an internal battery in a single device making it easier to handle challenging factory applications or to add sensing to existing industrial systems.
• Enables facilities to add a scalable wireless-sensor network without adding cables, cord sets, or external power.
• Available in two sensing modes: Diffuse and Retroreflective.

Banner Engineering Q45 D-Cell All-in-One Photoelectric Sensor Nodes

Banner Engineering Technical Datasheets

Turck Minifast Connectivity Solutions

Turck launches its family of Minifast junction boxes, cordsets, and receptacles that are Class II, Division 2 certified for use with combustible dust.

FEATURES

• Ideal for environments with potential ignition hazards from particles of grain, coal, metal, plastic, wood, chemicals, pharmaceuticals, sugar, flour, and milk powder.
• Eliminates the need for conduit/fittings and potential for water and condensation buildup, as well as poured seals.
• Reduces installation and commissioning time, as well as reduces overall costs and down-time repairs.
• FM-approved for installation in Class I, Division 2, Group A, B, C, D, and Class II, Division 2, Group E, F, G, and Class I, Zone 2, Group IIC.
• Available in stainless steel or nickel-plated brass hardware.

Turck Minifast Connectivity Solutions

Turck Technical Datasheets

Turck TS+ Temperature Sensor

Turck introduces the TS+ sensor, a line of programmable temperature sensors that are used to measure and display process temperatures.

FEATURES

• Features a rotatable stainless steel housing for a long service life, multi-color display, IO-Link, switching or analog outputs, and automatic detection of output signals for fast commissioning.
• One-piece translucent display with capacitive touchpads eliminate leak points and improve overall sealing.
• Ideal for a range of factory automation applications including automotive assembly, powertrain, and automated parts handling.
• Available with a built-in or remote mounted temperature probe for ultimate flexibility.

Turck TS+ Temperature Sensor

Turck Technical Datasheets

Banner Engineering WL50-3 and S18 Flex Arm Lights

Banner Engineering now provides its flex arm mount as a preassembled solution.

 
FEATURES

• Provides bright, even LED technology for close-range lighting that is ideal for enclosure, task, and work light applications.
• The WL50-3 LED Work Light is available with touch and PWM control for on/off and dimming functions, and can be actuated with bare hand or gloves.
• The S18 is installed inside the flex arm with an M12 connector to easily plug into a Banner Engineering power supply.
• Plug and play 300mm M12 cable directly connects to PSW-24-1 or other power supply.
• Industrial-grade flex arm is coated in vinyl and is 457mm-long.

Banner Engineering Flex Arm Lights
Banner Engineering Technical Datasheets

Phoenix Contact LPT2.5 Series of PCB Terminal Blocks

The new LPT(A)2.5 series from Phoenix Contact consists of PCB terminal blocks that combine the simple use of lever actuation with the reliability of a push-in spring-cage connection.

FEATURES

• Color-coded actuating levers provides intuitive and time-saving operation with distinct lever positions, as well as a higher degree of reliability in the field.
• Tool-free design enables time-saving connection and release of conductors with or without ferrules.
• Cable-entry funnel prevents individual litz wires from splicing.
• Actuating levers eliminate such errors as incorrect tightening torque with screw connections.
• Ranging from 1 to 12 positions with a max wire size of 12 AWG.

Phoenix Contact LPT2.5 Series

Phoenix Contact Technical Datasheets

Phoenix Contact LPC2.5 Series of Connectors

Phoenix Contact introduces its new LPC(A)2.5 series of lever-actuated PCB connectors.

FEATURES

• Ideal for device connections through tool-free lever connection technology.
• Lever principle enables convenient conductor connections with two hands, without aids, and the release of conductors with or without ferrules.
• Inadvertent terminal point opening is prevented and the possibility of errors during wiring is minimized.
• Ensures the user a high level of safety when connections need to be done quickly.

Phoenix Contact LPC2.5 Series of Connectors

Phoenix Contact Technical Datasheets

Banner Engineering E-Stop Control with Protective Shroud

Banner Engineering now offers its Emergency Stop controls with a durable protective shroud.

FEATURES

• The shroud’s sturdy one-piece design prevents accidental actuation of the E-Stop button, but does not impede easy access for regular, intentional interaction.
• Especially suited for material-handling conveyor lines, CPG packaging lines, and automotive assembly lines.
• The 30mm and flush-mount E-Stops ship with a pre-installed shroud, while panel-mount E-Stop kits are shipped with a shroud attachment.
• Available for both non-illuminated E-Stop models and those featuring Banner’s industry-exclusive bright 360-degree illumination.

Banner Engineering E-Stop Control with Protective Shroud

Banner Engineering Technical Datasheets

Stahlin PolyStar Enclosures in Color

Stahlin’s PolyStar enclosures are protective housings for equipment, and are now available in color: white, black, red, yellow, and blue.

FEATURES

• Ideal for industrial and commercial applications that require enclosures that blend in or stand out.
• Thick, polycarbonate side walls and stainless steel latches provide superior environmental protection and corrosion resistance while maintaining color and gloss integrity.
• Protects against rain, sleet, and snow; splashing and hose-directed water; submersion; sun and UV rays; and flames.
• Versatile, innovative panel-management system maximizes internal space with a T-Slot design for side-wall mounting and octagon mounting feet enabling unique angling and fit with equipment.
• Available in sizes from 6″ x 6″ to 20″ x 16″.

Stahlin PolyStar Enclosures in Color
Stahlin Technical Datasheets

Pepperl+Fuchs Tab-Ex 03 D2

Pepperl+Fuchs introduces the ecom-branded Tab-Ex 03 D2, its latest generation tablet suitable for use in hazardous areas.

FEATURES

• Selected by Google as part of the Android Enterprise Recommended program of manufacturers and service providers.
• Runs Google Android OS, as well as the Samsung Knox mobile security platform for real-time device protection.
• Features a programmable button for emergency calls, alarms, or push-to-talk.
• Google ARCore enables the latest augmented reality applications for remote support and training.
• Samsung DeX mode provides a desktop-like experience when connected to a keyboard, mouse, and monitor.
• The multitouch display can be operated with an S Pen and with gloves, and offers optimal readability in direct light.
• MIL-STD-810H certified, and designed for temperatures ranging from -20°C to +55°C.

Pepperl+Fuchs Tab-Ex 03 D2
Pepperl+Fuchs Technical Datasheets

Turck Q130WD AC/DC Inductive Sensor

Turck expands its line of Q130WD inductive sensors with a new AC/DC variant.

FEATURES

• Designed for the food and beverage industry, the this non-contact solution detects gaps in the flow of metal cans on high-speed food and beverage lines to prevent production errors.
• The Q130WD’s rectangular housing is made from FDA-approved plastics specified in accordance with IP68/IP69K ratings for washdown, and is resistant to all common alkaline and acidic cleaning agents.
• Switching signal and operating voltage displays feature bright corner LEDs that are clearly visible from every angle.
• Its 44mm height enables the Q130WD to easily fit between aluminum rails and can be installed flush.

Turck Q130WD AC/DC Inductive Sensor
Turck Technical Datasheets

Pepperl+Fuchs M-LB-2000

Pepperl+Fuchs introduces the new M-LB-2000 series of surge protectors ideal for use in junction boxes with limited space or as a space-neutral upgrade from knife disconnect terminal blocks.

FEATURES

• Plug-in modules for easy installation.
• Integrated loop disconnect function simplifies troubleshooting in the event of a fault.
• Certified in accordance with ATEX and IECEx up to Zone 1, and UL certified for Div. 1.
• Compact 6.2mm housing is designed for DIN-rail mounting.

Pepperl+Fuchs M-LB-2000

Pepperl+Fuchs Technical Datasheets

Pepperl+Fuchs F76 Flat Iron Pile Driver

Pepperl+Fuchs adds a new low-profile metal face inductive sensor, the F76 Flat Iron Pile Driver.

FEATURES

• Features a compact housing design that fits in tight spaces formerly unreachable by any other metal face product.
• 2mm sensing range, with NO, NC, NPN, and PNP outputs.
• Fully embeddable (recess embeddable 0.5mm in steel) with no effect on the sensing range.
• IP67/IP69/IP69K protection; weld-immune versions for applications with high temperatures or weld splatter.

Pepperl+Fuchs F76 Flat Iron Pile Driver

Pepperl+Fuchs Technical Datasheets

Pepperl+Fuchs ecom Ex-Cover Pro D2

Pepperl+Fuchs announces the ecom-branded Ex-Cover Pro D2, a new phone collaboration between ecom and Samsung rated for Class 1, Division 2 hazardous areas.

FEATURES

• Includes two programmable buttons for emergency calls, alarms, or push-to-talk.
• Enhance Touch capabilities enable use with gloves and in wet conditions.
• Features Android 10 and Samsung One UI 2.0 for a familiar interface, and the Samsung Knox mobile security platform for real-time device protection.
• MIL-STD-810G certified, IP-68 rated, and can withstand drops from 1.5m.

Pepperl+Fuchs ecom Ex-Cover Pro D2
Pepperl+Fuchs Technical Datasheets