Sunday, March 28, 2021

Phoenix Contact Axioline Smart Elements

Axioline Smart Elements from Phoenix Contact are an extension of the Axioline F I/O system. I/O is critical in providing data for automation systems, and data is king, whether referring to I/O signals directly connected on the PLC, or those distributed over industrial automation networks. The collection of this data can be achieved in various ways, and the market is very demanding, challenging manufacturers to meet ever-changing needs. As the newest addition to the Axioline product family, Smart Elements presents the perfect solution.

FEATURES

  • The pluggable Axioline Smart Elements from Phoenix Contact are system-free modules without bus communication. The stations consist of either a controller or bus interface module, one or more base units, and any combination of available smart elements to meet your I/O needs.
  • Reduces DIN rail usage by approximately 25 percent. Save space with the ability to stack two high, making it possible to fit up to 32 I/O channels on 15mm of rail space.
  • Simple push-in technology to wire and configure all I/O, reducing the need for tools and optimizing the wiring process.
  • Flexible modularity allows the combination of digital, analog, and/or special function elements in a single base, maximizing station density.
Phoenix Contact Axioline Smart Elements
Phoenix Contact Technical Datasheets

Wednesday, March 24, 2021

Honeywell Sensing and Control ABP2 Series Basic Board Mount Pressure Sensors

Honeywell Sensing and Control's new ABP2 Series are piezoresistive silicon pressure sensors offering a digital output for reading pressure over the specified full scale pressure span and temperature range.

They are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC).Calibrated output values for pressure and temperature are updated at approximately 200 Hz. All products are designed and manufactured according to ISO 9001 standards. The liquid media option includes an additional gel coating to protect the electronics under port P1, which enables use with non-corrosive liquids (e.g. water and saline) and in applications where condensation can occur.The ABP2 Series is available in tube packaging. Pocket tape and reel packaging is available upon request.FEATURES
  • Wide operating pressure ranges.
  • Extended operating and compensated temperature ranges.
  • Low Total Error Band. 
  • Industry-leading accuracy.
  • Ultra-low power consumption.
  • High burst pressures.
  • Variety of pressure ports.
  • Food grade compatible.
  • Harsh media compatible with flourosilicone gel.
  • Meets IPC/JEDEC J-STD-020E-MSL 1.
  • NSF-169, LFGB, and BPA compliant materials.
  • RoHS and REACH compliant materials.
  • Suitable for portable IoT applications.
Honeywell Sensing and Control ABP2 Series Basic Board Mount Pressure Sensors
Honeywell Sensing and Control Technical Datasheets


Tuesday, March 23, 2021

Banner Engineering S15C-BB-MTGQ In-Line Converter Expands Capabilities of T-GAGE Non-Contact Temperature Sensors

Banner Engineering's new S15C-BB-MTGQ is a plug-and-play in-line converter that presents T-GAGE temperature data over the RS-485 Modbus network. This converter is compatible with all T-GAGE models and allows access to additional sensor values such as relative temperature readings and core/ambient temperature.

FEATURES

  • Plug-and-play, in-line installation with no programming required.
  • Converts T-GAGE temperature information to Modbus registers.
  • Access additional sensor values such as relative temperature readings in °C or °F, threshold settings, and core/ambient temperature.
  • Rugged over-molded design meets IEC IP65, IEC IP67, and IEC IP68 environmental ratings.
  • Interface to the RS-485 Modbus RTU network through a 4-pin or 5-pin M12 connection.
Banner Engineering S15C-BB-MTGQ In-Line Converter

Friday, March 19, 2021

Pro-face by Schneider Electric ST6000 Series GP-Pro EX Compatible HMI

The Pro-face ST6000 Series Basic Terminal brings a new level of visualization to the Basic HMI market. It is a superior quality display that improves operability and is unmatched by any other basic product.

FEATURES

  • Delivers an intuitive user experience utilizing the latest software and visualization innovations from the new BLUE basic panel programming software.
  • Compatible with the HMI Development software GP-Pro EX, allowing for customers to easily transition projects from previous Pro-face HMIs to updated hardware.
  • CNC machined aluminum front panel with 16 million color display.
  • Available in 4.3”, 7”, 10”, 12”, and 15” models.
Pro-face by Schneider Electric ST6000 Series GP-Pro EX Compatible HMI
Pro-face by Schneider Electric Technical Datasheets

Monday, March 15, 2021

Carlo Gavazzi NRG Series Solid State Relays

Carlo Gavazzi’s NRG series solid state relays are the switching components in the NRG BUS chain.

FEATURES

  • Integrated monitoring and communication interface provides current, voltage, frequency, power, energy consumption, load, and SSR running hours in real-time.
  • Output ratings up to 660VAC, 65A with heatsink and 660VAC, 90A without heatsink.
  • All-in-one solution for fast switching, accurate monitoring, and high-speed communication.
  • Default control through communication interface or DC control.
  • 1-phase, AC zero cross solid state relays.
  • Selectable switching modes: ON/OFF or power control (burst, distributed, or advanced full cycle).
  • Screw and box clamp connection options.
Carlo Gavazzi NRG Series Solid State Relays
Carlo Gavazzi Technical Datasheets

Carlo Gavazzi NRGC Series Controllers

Carlo Gavazzi's NRGC series are controllers which bridge the field level devices to the control level to allow exchange of data in real-time with the NRG solid state relays.

FEATURES

  • 2x RJ45 sockets to allow daisy chaining from one NRGC to another.
  • Integrated monitoring and communication interface provides current, voltage, frequency, power, energy consumption, load, and SSR running hours in real-time.
  • Real-time monitoring allows for prevention of machine stoppages during operation and timely decisions for better machine and process management.
  • Fast and accurate configuration of solid-state relays on the BUS.
  • EtherNet/IP (ODVA compatible), PROFINET (PI certified) or Modbus RTU over RS485.

Carlo Gavazzi NRGC Series Controllers
Carlo Gavazzi Technical Datasheets



Schmersal AZM150 Slim Solenoid Interlock

The AZM150 from Schmersal is characterised by its slimline design and its 1500 Newton interlocking force. The AZM150 solenoid interlock can be combined with three different actuators for different installation situations: a straight actuator for sliding doors, an angled actuator for large revolving doors and a movable actuator for smaller revolving doors. One of the plus points of the interlock is the rotating actuator head which can be locked simply by putting the lid on rather than a screw fitting. The rotating actuator head has two feeder slots to enable a range of installation positions and approach options. This makes the interlock really flexible to use.

FEATURES

  • Actuating head can be repositioned by 4 x 90°.
  • Holding force FZh = 1,500 N.
  • Latching force 50 N.
  • Individually coded version with coding level "High" according to ISO 14119.
  • Power to unlock / Power to lock.
  • 4 switching contacts.
  • WxHxD: 40 x 204 x 48 mm.
  • Protection class IP65, IP67.
  • Compatible with 40 mm profiles.
Schmersal AZM150 Slim Solenoid Interlock
Schmersal Technical Datasheets

Friday, March 12, 2021

Phoenix Contact BL2 PPC 1200 Compact Panel IPC

Phoenix Contact's new BL2 PPC 1200 expands the BL2 series industrial PC family with a compact panel PC in small screen sizes for applications where space is limited. The BL2 PPC 1200 features a bezel-less, logo-less, widescreen capacitive touch screen in either a 7” or 10” size. These fanless industrial PCs offer a modern appearance combined with a competitive price point.

FEATURES

  • 7” (1024 x 600 resolution) or 10” (1280 x 800 resolution) capacitive touch screens.
  • Powered by an energy-efficient Intel Celeron N3350 CPU and features a standard 4GB of RAM.
  • Standard mounting includes the traditional standard panel mount (via included mounting clips) or VESA 75/100.
  • Windows 10 IOT Enterprise 2019 LTSB pre-installed.

Wednesday, March 10, 2021

PULS FIEPOS FPT Series Power Supplies

PULS, the leading manufacturer of the most efficient DIN-Rail switched mode power supplies and DC power products, has recently released 6 new 24VDC FIEPOS (Field Power Supplies) for decentralized power, on machine mounting and IP54 and IP67 applications. This new series will initially include three 300W models and three 500W models with 3-phase input power and include PULS’ amazing reliability and efficiency standards. PULS offers both Basic versions with 1 output or eFused with up to 4 programmable outputs. All models offer a status output of either DC-OK contact, or I/O-Link. Flexibility in mounting options, connector styles, and power range, make FIEPOS adaptable for almost any application.

FEATURES

  • 24VDC, 300W or 500W Continuous Power. 
  • 380-480VAC Input. 
  • 600W or 1000W Short Term BonusPower®. 
  • High Peak Current for Protective Devices.
  • 57mm Depth for Low Profile Machine Mounting. 
  • Efficiency >95%. 
  • Operational Between -25°C and +70°C.
  • Multiple Connector Options. 
  • Operation Status via DC-OK or I/O-Link. 
  • DIN-Rail or surface Mount.

Wednesday, March 3, 2021

Banner Engineering DXM1200E Series Wireless Controllers

Banner Engineering's newest model of the DXM1200 series wireless controllers maintain the same programming and logic capabilities of their predecessors while increasing installation flexibility. Now offered with an external antenna, the DXM1200E improves wireless range and gives the ability to extend the antenna to the ideal location for tough to reach wireless devices. Additionally, it features an industrial M12 D-Code ethernet connection and two courtesy Modbus RTU ports for easy connection of sensors located nearby the DXM1200E.

FEATURES

  • Features an industrial M12 D-Code ethernet connection and two courtesy Modbus RTU ports for easy connection of sensors located nearby the DXM1200E.
  • DXM Series industrial wireless controllers are designed to facilitate Ethernet connectivity and Industrial Internet of Things (IIoT) applications.
  • Converts Modbus RTU to Modbus TCP/IP or Ethernet I/P.
  • Logic controller can be programmed using action rules and text language methods.
  • Micro SD card for data logging.
  • Email and text alerts.
  • Local I/O options: isolated discrete inputs, universal inputs, SPDT (Form C) relay outputs, NMOS outputs, and analog outputs.
  • Powered by 12 to 30VDC, 12VDC solar panel, or battery backup.
  • RS-232, RS-485, and Ethernet communications ports; and a USB configuration port.
  • LCD display for I/O information and user programmable LED’s.
  • Cell modems available for cellular connectivity (sold separately).
Banner Engineering DXM1200E Series Wireless Controllers
Banner Engineering Technical Datasheets



Littelfuse LST Series SPD Thermally Protected Varistor

The LST Varistor Series is constructed with Littelfuse’s renowned thermally protected varistor technology (TMOV). The built-in thermal disconnecting function and electric arc shield provides additional protection to prevent catastrophic failure and fire hazard even under the extreme circumstances of varistor end-of-life or abnormal overvoltage conditions. It is specifically designed for Type 1 and Type 2 Surge Protective Devices (SPDs).

FEATURES

  • 200kA SCCR, 20kA In, UL1449 Type 4 recognized component assembly.
  • Same footprint and PCB layout for Imax 50kA and 75kA options. 
  • Mechanically triggered AC and DC rated micro-switch with Normally Open or Normally Closed options for remote indication/monitoring circuit.
  • Visual tab option to display LST working status. 
  • RoHS compliant, Lead-free, and Halogen-free.
BENEFITS

  • Facilitate meeting UL1449 listed Type 1 or Type 2 standards.
  • Same PCB layout/design for 50kA and 75kA Imax rated SPDs.
  • More flexibilities/options for designing an isolated remote indication/monitoring circuit. 
  • Clear indication for technician/engineer to replace EOL product to continue surge protection for the end product. 
  • Environment-friendly.