Thursday, August 19, 2021

Phoenix Contact DMCC 0.5 Series Shielded PCB Connectors

The new DMCC 0.5 series from Phoenix Contact extends its existing portfolio of shielded PCB connectors with a pitch of 2.54mm.
 
FEATURES
  • The featured EMC shielding enables the reliable supply of data and power to devices, even via a single Ethernet cable.
  • Ideal for light barriers, proximity switches, rotary encoders, sensors, and cameras.
  • Gold-plated contacts enable optimal transmission quality with long-term stability.
  • Available in packaging for automated pick-and-place assembly.
  • Optional tool for manual and automated crimping.
Posted by at No comments:
Labels: , ,

Phoenix Contact Vehicle AC Charging Inlets

Phoenix Contact introduces its new CHARX Generation 4 universal vehicle AC charging inlets.

FEATURES
  • Ideal solution for any type of electric vehicle where DC charging is not needed.
  • Meets the standard requirements for Type 1, North America and Type 2, Europe.
  • Both Type 1 and Type 2 inlets have uniform dimensional characteristics enabling a single mounting configuration for vehicle manufacturers.
  • Inlets are fully assembled, including locking actuator, temperature sensors, and dust caps, and have a standard 2-meter power cable with other options available.
Posted by at No comments:
Labels: , ,

Banner Engineering Q45VAC All-in-One C-Cell Vibration Sensor

Banner Engineering’s Wireless Q45VAC All-in-One C-Cell Vibration and Temperature Sensor extends battery life to three years.

FEATURES
  • This industrial, battery-powered device analyzes vibration and temperature data to identify and predict failures in rotating machinery.
  • Ideal for such equipment as motors, pumps, rotary compressors, exhaust or HVAC fan motors, and spindles.
  • This unit combines sensors with a wireless node and battery power supply in a single, compact device.
  • The All-in-One composition eliminates the cost of ordering and installing separate components.
Posted by at No comments:
Labels: , , ,

Banner Engineering Q45VTPD D-Cell Vibration & Temperature Node

Banner Engineering launches the Q45VTPD, a D-cell powered version of its Q45VTP wireless vibration and temperature node.

FEATURES
  • Wirelessly communicates with any Sure Cross Performance Gateway and mounts on a variety of machines to analyze vibration data and identify and predict failures in rotating machinery.
  • Uses DIP switches to allow multiple configuration options for the vibration characteristics being monitored by Banner’s QM30VT1 vibration and temperature sensor.
  • The D-cell extends battery life to four years.
  • Available with (Q45VTPD) and without (Q45VTPD NB) D-cell battery.
Posted by at No comments:
Labels: , ,

Banner Engineering SI-GL42 Switches

Banner SI-GL42 Safety Locking Switches ensure that safety gates, safety doors, and other protective guards remain closed for as long as a hazardous situation exists.

FEATURES
  • Composed of a lightweight glass-reinforced thermoplastic housing with metal components in mechanically stressed areas.
  • Actuator head rotates in 90° increments to accommodate five positions, including vertical.
  • Available in two locking mechanism types: Spring lock with energized solenoid release, or energized solenoid lock with spring release.
  • Multiple actuator and monitoring contact configurations for any automation safety application.
  • Activated locks can be manually unlocked if machines need to be accessed for maintenance or repair.
Posted by at No comments:
Labels: , ,

Banner Engineering Q45 All-in-One D-Cell Photoelectric Sensor Nodes

Banner Engineering extends its Q45 line of all-in-one photoelectric sensor nodes with a new D-cell battery version.

FEATURES
  • Provides four years of maintenance-free service, double the battery life of existing versions with smaller batteries.
  • The Q45 sensors are self-contained units for coordinating multiple machines in part-counting, as well as OEE applications.
  • Each model combines a sensor, wireless node, and an internal battery in a single device making it easier to handle challenging factory applications or to add sensing to existing industrial systems.
  • Enables facilities to add a scalable wireless-sensor network without adding cables, cord sets, or external power.
  • Available in two sensing modes: Diffuse and Retroreflective.
Posted by at No comments:
Labels: , , ,

Turck Minifast Connectivity Solutions

Turck launches its family of Minifast junction boxes, cordsets, and receptacles that are Class II, Division 2 certified for use with combustible dust.

FEATURES
  • Ideal for environments with potential ignition hazards from particles of grain, coal, metal, plastic, wood, chemicals, pharmaceuticals, sugar, flour, and milk powder.
  • Eliminates the need for conduit/fittings and potential for water and condensation buildup, as well as poured seals.
  • Reduces installation and commissioning time, as well as reduces overall costs and down-time repairs.
  • FM-approved for installation in Class I, Division 2, Group A, B, C, D, and Class II, Division 2, Group E, F, G, and Class I, Zone 2, Group IIC.
  • Available in stainless steel or nickel-plated brass hardware.
Turck Minifast Connectivity Solutions
Posted by at No comments:
Labels: , ,

Turck TS+ Temperature Sensor

Turck introduces the TS+ sensor, a line of programmable temperature sensors that are used to measure and display process temperatures.

FEATURES
  • Features a rotatable stainless steel housing for a long service life, multi-color display, IO-Link, switching or analog outputs, and automatic detection of output signals for fast commissioning.
  • One-piece translucent display with capacitive touchpads eliminate leak points and improve overall sealing.
  • Ideal for a range of factory automation applications including automotive assembly, powertrain, and automated parts handling.
  • Available with a built-in or remote mounted temperature probe for ultimate flexibility.
Posted by at No comments:
Labels: , ,

Banner Engineering WL50-3 and S18 Flex Arm Lights

Banner Engineering now provides its flex arm mount as a preassembled solution.
 
FEATURES
  • Provides bright, even LED technology for close-range lighting that is ideal for enclosure, task, and work light applications.
  • The WL50-3 LED Work Light is available with touch and PWM control for on/off and dimming functions, and can be actuated with bare hand or gloves.
  • The S18 is installed inside the flex arm with an M12 connector to easily plug into a Banner Engineering power supply.
  • Plug and play 300mm M12 cable directly connects to PSW-24-1 or other power supply.
  • Industrial-grade flex arm is coated in vinyl and is 457mm-long.
Banner Engineering Flex Arm Lights
Banner Engineering Technical Datasheets
Posted by at No comments:
Labels: , ,

Phoenix Contact LPT2.5 Series of PCB Terminal Blocks


The new LPT(A)2.5 series from Phoenix Contact consists of PCB terminal blocks that combine the simple use of lever actuation with the reliability of a push-in spring-cage connection.

FEATURES
  • Color-coded actuating levers provides intuitive and time-saving operation with distinct lever positions, as well as a higher degree of reliability in the field.
  • Tool-free design enables time-saving connection and release of conductors with or without ferrules.
  • Cable-entry funnel prevents individual litz wires from splicing.
  • Actuating levers eliminate such errors as incorrect tightening torque with screw connections.
  • Ranging from 1 to 12 positions with a max wire size of 12 AWG.
Posted by at No comments:
Labels: , ,

Phoenix Contact LPC2.5 Series of Connectors

Phoenix Contact introduces its new LPC(A)2.5 series of lever-actuated PCB connectors.

FEATURES
  • Ideal for device connections through tool-free lever connection technology.
  • Lever principle enables convenient conductor connections with two hands, without aids, and the release of conductors with or without ferrules.
  • Inadvertent terminal point opening is prevented and the possibility of errors during wiring is minimized.
  • Ensures the user a high level of safety when connections need to be done quickly.
Posted by at No comments:
Labels: , ,

Banner Engineering E-Stop Control with Protective Shroud



Banner Engineering now offers its Emergency Stop controls with a durable protective shroud.

FEATURES
  • The shroud’s sturdy one-piece design prevents accidental actuation of the E-Stop button, but does not impede easy access for regular, intentional interaction.
  • Especially suited for material-handling conveyor lines, CPG packaging lines, and automotive assembly lines.
  • The 30mm and flush-mount E-Stops ship with a pre-installed shroud, while panel-mount E-Stop kits are shipped with a shroud attachment.
  • Available for both non-illuminated E-Stop models and those featuring Banner’s industry-exclusive bright 360-degree illumination.
Posted by at No comments:
Labels: , , ,
Subscribe to: Posts (Atom)