skip to main |
skip to sidebar
Carlo Gavazzi is pleased to announce the launch of their new WM15 Three Phase Power Analyzer. This is an exciting new addition to their well-established range of energy meters and power analyzers, which are targeted to assist manufacturers and end users in monitoring and managing escalating energy costs.
The WM15 is a Class 1 (kWh) 3-phase power analyzer which can be used for single, two and three phase systems, as well as wild-leg systems. It can measure most relevant instantaneous electrical variables, energy consumption and harmonic distortion.
The WM15 is an ideal alternative when traditional analog meters need to be replaced. This provides final users with immediate visual indication of the current values by means of the three bar graphs shown on the matrix LCD display.
Installation is easy and error-proof! Commissioning is fast, making the WM15 ideal for panel builders, OEMs and installers. The economical WM15 is designed for use in a variety of markets and applications, including conventional energy, building and industrial automation.
FEATURES
- Self-powered version: 208 to 415 VLL AC
- Auxiliary power supply version: 208 to 600 VLL AC
- Current inputs: 5A by CT connection
- Free downloadable configuration software
- 3-phase/4-wires, 3-phase/3-wires, 2-phase, 1-phase systems
- Optical port for configuration via OptoProg (Bluetooth or USB)
- Digital output for pulse or alarm outputs
- RS485 Modbus RTU port (optional)
- cULus listed
Designed with simplicity in mind and built to perform in industrial environments, Banner Engineering's R70 MultiHop Repeater Kits make it easy and cost-effective to create and deploy a wireless MultiHop network or scale and adapt an existing network to meet changing needs. The kit is built around a preconfigured MultiHop radio with a sleek design and includes all the hardware required for installation, enabling rapid deployment in challenging locations.
KEY BENEFITS
Monitor Equipment Over Long Distances
R70 MultiHop Repeater Kits make it easy to extend the range and reliability of any MultiHop network. Each network consists of a MultiHop radio configured as a master device and one or more MultiHop radios configured as slave devices. The R70 wireless segment acts as a repeater between the master and slave radios, making it easy to extend the range of the network and/or circumvent large obstacles in an application. Data from connected sensors is communicated back to the master radio. Add more sensors by adding more radios to the network, and extend the network to monitor more equipment by adding more R70 MultiHop Repeater Kits.
Easy Installation for Rapid Deployment
R70 Repeater Kits are compact and easy to install. Each kit includes an R70 MultiHop wireless segment, an AC power base with QD, 5-pin cable with ½-20/Micro-style Integral QD, and solid steel bracket. Simply turn and click the repeater into position on the base, secure the assembly to the bracket, and connect the cable to power the kit. The design allows for easy installation in locations where AC power is available, and the 15’ cable provides tremendous flexibility for deploying and powering the kit.
Compatible with MultiHop Wireless Solutions Kit
R70 MultiHop Repeater kits are plug-and-play compatible with other MultiHop devices and MultiHop Wireless Solutions Kits. This interoperability makes it easy to create wireless solutions capable of monitoring equipment and assets distributed over wide areas. With the Solutions Kit, data from each sensing point in the network can be accessed and used to establish performance baselines and thresholds, view graphs to identify trends and issues, and make better decisions.
Grow a MultiHop Network at a Reduced Cost
Reduce the cost and complexity of deploying or expanding a MultiHop wireless network. Each R70 repeater kit includes a preconfigured MultiHop repeater that functions on AC power for easy and accessible installation. This makes the R70 a smaller and less expensive option in comparison to other MultiHop devices that have a broader feature set. The designated functionality of the R70 further reduces costs by eliminating the time and expense of configuring multiple MultiHop data radios —a significant advantage for large-scale deployments.
APPLICATIONS
- Bearing health
- HVAC systems
- Machine runtime monitoring
- Environmental monitoring
Banner Engineering Q45 Series all-in-one kits now include Q45PS wireless pressure sensors and Q45THA wireless temperature and humidity sensors. In addition, the Q45VA all-in-one is available in a kit with multiple mounting brackets, simplifying installation for rapid deployment. Each kit combines a sensor and wireless node in one compact assembly. Once deployed, they will collect critical data from sensing points throughout a system or facility and communicate it to a DXM wireless controller over a Sure Cross wireless network.
KEY BENEFITS
One Cost-Effective Device for Rapid Deployment
The Q45THA and Q45PS All-in-one kits combine a sensor, wireless node, and battery power supply in one compact and completely wireless device that costs less than purchasing the sensor and node separately. The all-in-one single-piece design eliminates the time, labor, and expense of installing separate sensors and nodes—a significant advantage for large-scale deployments.
Data-Driven Decision Making
Use Q45 Series all-in-one kits with a DXM Series wireless controller and Connected Data Solutions software to create a complete, end-to-end IIoT solution. The software provides you with tools to analyze and visualize sensor data collected over time. Use this data to make informed decisions about operations, equipment, and assets. This web-based platform can be accessed anywhere at any time using an internet-connected device.
The Versatility to Solve Any Application
All-in-one wireless sensors make it easy to monitor and collect data from a single point or multiple points on critical systems or environments throughout a facility. Users can deploy and redeploy a single all-in-one sensor multiple times or deploy multiple all-in-one sensors in a network.
Bracket Kit Simplifies Installation
The Q45VA Bracket Kit was designed to provide not only the power and capabilities of the Q45VA all-in-one vibration and temperature sensor and wireless node, but also three different mounting options to allow you to easily select the best mode of installation for your application. This kit includes a Q45VA vibration and temperature sensor and wireless node, a magnetic bracket, and a non-magnetic bracket, to give you flexibility in your selection of a permanent, semi-permanent, or portable installation.
APPLICATIONS
- Pneumatic systems
- Hydraulic systems
- Energy and facility management
- Data centers and server rooms
Banner Engineering introduces the DXM1000 and 1200 Industrial Wireless Controllers. The new models of the DXM Series wireless controllers build on the programming and logic capabilities of their predecessors. The DXM1000 features increased processing power of 300Mhz and 16MB memory. The DXM1200 offers that same processing power and memory and is housed in an IP67 rated enclosure for easy installation in challenging environments. These improvements make it possible for users to create more complex solutions and solve more applications.
KEY BENEFITS
Increased Processing Power and Memory
DXM Series wireless controllers now have three times more processing power and eight times more memory than was previously available. Along with this comes an additional 2000 standard volatile registers, 1000 non-volatile registers and 1500 floating point registers for increased data capacity and flexibility in generating solutions. This improvement also expands the ScriptBasic programming capabilities offered by the DXM Series and enables larger scripts and faster script processing.
Rugged Housing For Harsh Environments
The robust, IP67 rated housing of the DXM1200 easily installs in most environments without the need for an additional enclosure. With peel-and-stick implementation, bring the improved processing power and memory of the DXM into challenging applications without hassle.
Easy Access to Critical Equipment Data
By integrating a wireless radio, cellular and Ethernet connectivity, and local I/O, DXM Series wireless controllers make it easy to connect devices in local wireless networks with the internet and/or host systems. A DXM can collect data from sensors and other input devices, log the data, communicate status updates to other devices on the network, and send email and text notifications for user-defined events. Collected data can be sent to a Cloud Webserver or PLC for remote monitoring and analysis.
Complete, End-to-End IIoT Solutions
Build on the features and capabilities offered by the DXM by using Banner's Connected Data Solutions cloud software. Powerful tools built into the software make it easy to access and analyze data from each device in the network, establish performance baselines and thresholds, identify trends and issues, and make better decisions about your equipment and assets.
APPLICATIONS
- Pick-to-light assembly
- Kitting or order fulfillment
- Remote monitoring
- Predictive maintenance
SMC Corporation of America has added a 5000W cooling capacity model to their HRS-R series of thermo-chillers. The HRS-R is the IP54 rated variation of our popular HRS compact recirculating chiller. Upgrades include an IP54 electrical box and IP67 cable entries on the back panel. Additionally, the entire paneled housing is comprised of coated metal to resist degradation from oil mist, with an available stainless steel option for greater corrosion resistance. An optional 12L circulating coolant return tank can be selected. This tank has a capped opening separate from the fill port for easier cleaning when necessary. Finally, the ambient temperature upper limit has been increased to 45°C.
The HRS-R shares many features with the standard HRS, including common overall dimensions, caster wheels for mobility, an angled fill port with a level indicator for the fluid tank, and a heating function. A magnet pump eliminates leakage and seal replacement. The dustproof filter is removable for cleaning without tools. The refrigerant is air cooled. If an external PF3W flow sensor is desired, a 24VDC power supply is available at the rear.
FEATURES
- Cooling capacities: 1.9 kW (6500 BTU/hr, 0.54 ton), 2.9 kW (9900 BTU/hr, 0.82 ton), 5.0 kW (17060 BTU/hr, 1.42 ton) (at 60Hz)
- Temperature range setting: 5 to 40°C
- Temperature stability: ±0.1°C
- R410A refrigerant
- Circulating fluid: Tap water or 15% ethylene glycol solution
- Communication functions: RS232C / RS485, and 2 inputs / 3 outputs
- Power supply requirement: single phase 200 to 230VAC, 50/60Hz
- Standards: CE, RoHS
The wedge cam mechanism of the SMC Corporation of America MWP air press cylinders allows for approximately six times the pressing force of the cylinders from the beginning of the stroke movement.
FEATURES
- Increased pressing force can be stably output in 5mm from the beginning of the stroke movement.
- 125mm bore version offers maximum press weight of 3 tons.
- Auto switch mountable
(Auto switches compatible with the standard product, such as D-M9*, D-A9*, D-P3DW*,
can be mounted).
- Changeable output specifications with driving cylinder change
(Common specifications in increased force unit).
- Air consumption decreased by half and width decreased by 60% compared to the cylinders with equal output.
Phoenix Contact's PROJECT complete intuitive planning and marking software makes is easier than ever to configure terminal block rail assemblies and create professional marking materials for terminal blocks, conductors, cables, devices, and systems.
The new PROJECT complete software is replacing the existing Clip Project software. You may continue to use the existing version, but there will be no further updates for this, so we encourage you to start using the new PROJECT complete. All files from the previous versions will work in the new PROJECT complete.
FEATURES
- New Office 365 look
- Both programs offer an intuitive user interface, and help guides and videos are available
- Intuitive software operation is clear and convenient with customizable user interface
- Easy integration, thanks to optimized interfaces to all common computer-aided engineering (CAE) programs and spreadsheet formats
- The marking software now has the template designer built in
- Graphics, various barcode types, and geometric elements such as squares, circles, and lines can be implemented for design work
