skip to main |
skip to sidebar
The Pre-Configured Industrial Distribution Frame (IDF) from Pandit is specifically engineered to deploy and protect rack mount Ethernet switches in industrial applications. Extra-depth allows room for cable management, power management, and switch stack cables and accommodates up to 5 switches. The innovative design provides consistent equipment deployment with faster installation and can significantly lower the risk of downtime due to switch overheating.
FEATURES
- Built-in features such as cable management, power infrastructure and grounding deliver 25% faster installation.
- Standardized pre-configured equipment and accessory layout assures consistency.
- Optimized design provides 3x the cooling capacity over typical deployments for increased reliability.
- Double hinges allow front and rear access to network switch equipment for quick and easy maintenance.
- UL 508A Listed, UL Type 4/12 and IP66 rated to ensure safety and reliability.
Schmersal has applied Radio-frequency identification (RFID) technology in the new RSS260 series electronic safety sensor. The RSS260 is designed for application in safety circuits monitoring the position of hinged, sliding or removable guards using a specifically coded, passive RFID tag in the actuator.
Radio-frequency identification (RFID) is a technology that uses radio waves to provide a wireless data exchange of a coded identification number between a target (tag, label, or chip) and a reader – a device which transmits an encoded radio signal to the target. Schmersal has applied this technology to the RSS260 series non-contact safety sensor. In this application the RFID actuator target is attached to the safety guard door and sensor is attached to the machine frame. The non-contact sensing allows for longer switch life - Since there are no moving parts there is little to no wear on the components. As safety guard panels age, the sensor will also tolerate misalignments, up to 10 mm.
The clear advantage of using RFID technology is enhanced tamper resistance. Since the RSS260 uses a special frequency, the sensor will disregard non-actuator RFID signals, and the passive RFID tag in the actuator will not interfere with other RFID systems such as product trackers. The RSS260 is also difficult to by-pass because it has the option of individual coding: The basic version of the sensor responds to any RST target actuator; The “I1” version only accepts the coded ID number of the specific target actuator which is taught in during the first start-up; The “I2” version allows the teach-in process to be repeated, allowing replacement of a lost or damaged actuator.
The RSS260 series has several actuator targets and accepts two approach directions which allow for mounting flexibility. The standard actuator (RST-260-1) matches the body profile of the switch which fits to regular aluminum profile systems, the RST-16-1 is a very flat, elongated actuator suitable for mounting on Plexiglas safety gates, and the RST-U-1 an extremely compact rectangular target designed for integration into the surrounding construction of the guard door. Any of these targets can approach the sensor from either the front face or the long side.
The RSS260 also features all of the diagnostic advantages of our other electronic safety sensors and solenoid interlocks. It comes standard with LEDs to indicate various errors. For more advanced indication the RSS260 is also available with serial diagnostics to communicate its status via serial data packages for use in various network protocols. Because of an integrated dual monitoring microprocessor, only one switch is required to meet PLe per ISO 13849-1 and SIL3 per IEC 62061. The RSS260 can be connected in series with other electronic sensors and locking switches, up to 31 devices, without loss of signal or safety level when monitored with a number of standard Schmersal safety controllers.
Schmersal RSS260 Compact RFID Safety Sensor
Schmersal Technical Datasheets
The PS116 from Schmersal is an extremely versatile yet compact and robust limit switch for determining the position of movable machine components or machine guards that can be moved laterally or rotated.
For ease of installation, these limit switches are prewired with either a M12 connector or a 2 meter cable lead, on the bottom or side of the housing. Since the housing is symmetrical, the switch can be mounted with the cable or connector to the left or right. The PS116 is available with 10 actuator elements - plungers, roller levers, and a rod lever - which are field adjustable, to be set in one of 8 positions (45° steps) to meet application requirements.
The PS116 offers 2 and 3 contact options, in several configurations. The contacts are either snap action (Z) with optional latching (manual reset), or slow action (T) with overlapping, simultaneous or staggered contacts. All normally closed contacts are positive break, according to IEC 60947-5-1.
The compact body design of the PS116 series measures only 1.25” x 2.25” x 0.65”, perfect for use in confined spaces to monitor the position or presence of moving parts, work pieces or conveyed materials. The housings are die-cast zinc and heavy duty thermoplastic and are dust tight and sealed to withstand strong water jets (IP66) and submersion in water (IP67), suitable for use in all industrial environments.
In conjunction with an appropriate safety controller, a single position switch can be used up to PLd, while using two can achieve PLe, according to ISO 13849-1.
Elevator Industry
The PS116 limit switch also fulfills the requirements for use in elevators according to EN 81-1, because all available switching elements have a contact opening of 2 x 2 mm.
Schmersal PS116 Compact Safety-Rated Limit Switches
Schmersal Technical Datasheets
To reduce installation time and increase reliability of Deutsch connectors, TURCK
developed its new Deutsch DT series of overmolded connectors for the mobile equipment industry. The newly designed
connectors ensure longevity in demanding environments where shock, vibration, cold temperature, moisture and oils can affect
performance.
Deutsch connectors are widely used in the heavy equipment sector, and TURCK developed its two-wire, pin and socket DT
connectors to address the environmental needs of the industry. The overmolded design, TPE jacketing and IP67 rating provide
additional reinforcement, abrasion and oil resistance, and superior performance in a ready-to-use solution. The connectors are
ideal for wiring harness assemblies in vehicles, agricultural and construction equipment, or any application which requires a cost
effect quick disconnect solution.
“TURCK’s history in overmolding connectors, coupled with our vast knowledge of designing jacketed cables, provided a natural
opportunity to improve an industry standard,” said April Ankrum, Senior Product Manager for TURCK. “This Deutsch DT series is
the first of a new overmolded Deutsch line we look to expand in early 2015, to improve low-cost and durable solutions for harsh
applications.”
TURCK’s Deutsch DT series connectors feature a fully encapsulated rugged overmold which is IP67 rated. The cable performs well
in low temperatures with a -40 degrees Celsius cold bend rating, is sunlight resistant and Oil Res II rated.
Turck Deutsch DT Connectors
Turck Technical Datasheets
The EU2B series of 30mm hazardous location switches and pilot devices from IDEC feature contact blocks and lamps that are fully sealed to prevent the release of enough electrical energy to cause an explosion.
Available devices include:
- Pushbuttons
- Pilot Lights
- Emergency Stop Switches
- Selector Switches
- Key Selector Switches
- Analog Meters
This series complies with the latest hazardous location ratings, including those issued under UL/NEC 505 and ATEX, making these devices ideal for UL 698A panel builders and applications with panels in hazardous locations that require specific safety ratings,
and enclosure manufacturers.
IDEC EU2B Hazardous Location Switches and Pilot Lights
IDEC Technical Datasheets
Phoenix Contact has added the non-insulated PTSPL 6 push-lock spring-cage PCB terminal blocks to its comprehensive line of power products. With the new PTSPL 6 terminal block, Phoenix Contact offers a reliable alternative to soldering wires directly to printed circuit boards. Since this terminal has no plastic insulator, it is 50 percent lower in height compared to other PCB terminals in its power and performance class and offers an unrestricted voltage rating at currents up to 30A. The product is available in both an open and closed configuration and is compatible with through-hole reflow (THR) soldering processes. Parts are packaged on tape-and-reel for automatic placement on the PCB.
FEATURES
- No special tools are needed to open the spring
- Tape-and-reel packing for automated assembly in reflow process
- Two PCB pin lengths: 2.1mm and 2.9mm
- Available in open or closed configuration
- Product can be used multiple times
Responding to the need for products in the photovoltaic market, Phoenix Contact introduces the new PT-SG/1 "grapple contact". The grapple contact is a THR-solderable, single-position metal contact without an insulating housing. It is primarily used for internal device wiring in device manufacturing. The PT-SG/1 offers a spring-cage contact system, and is a cost-effective, tool-free way to terminate flat ribbon and other conductors. This product is ideal for manufacturers of solar inverters and photovoltaic module outlet boxes as a method of making DC/AC connections that are led outside of the box, as well as connections to built-in chokes and coils.
FEATURES
- No special tools are needed to open and terminate the spring
- Tape-and-reel packing for automated assembly in reflow process
- Two PCB pin lengths: 2.1mm and 2.9mm
- Product can be used multiple times
- Easy termination of flat ribbon conductors
