Wednesday, July 2, 2014

Schneider Electric Modicon M221 PLC



The Next Generation of MachineStruxure automation solution is comprised of a new family of controllers such as the new Modicon M221 PLC. Programmed with the intuitive SoMachine Basic software, the M221 PLC offers best-in-class performance coupled with flexibility and value. 

The Modicon M221 PLC is available in either a Brick (Compact) or Book (Modular) format with class leading features like an embedded Ethernet port, SD Card slot for firmware and project updates, 2 on-board Analog Inputs and 2 Pulse Train Outputs (PTO) with S-Curve capability for smooth hardwired motion. A USB programming port is also standard, and if your application needs additional I/O points, the Modicon M221 gives you the option to use cost-effective TMC expansion cartridges, the new TM3 I/O Cards or utilize your existing TM2 based I/O architectures.

Schneider Electric Modicon M221 Logic Controller

Schneider Electric Technical Datasheets


Rittal Power Isolation Enclosure



Safety and machine up time are two of the most important considerations on the production floor, especially when it comes to high-current electrical equipment. To lessen concern of these critical factors on engineers and service personnel, the brain trust at Rittal has developed a technology that minimizes the risk of arc flash explosions in the smart, highly engineered way that only Rittal can.

When considering safety and design flexibility during the planning stage, Rittal’s Power Isolation Enclosure solutions provide the capability to isolate high- and low-voltage equipment within the confines of their respective enclosure, assisting in compliance with NFPA 70E work place safety standards.
  • Rittal’s off-the-shelf power isolution solutions decrease the risk of personnel being exposed to arc flash and related injuries
  • Rittal’s solutions provide the capability to isolate low-voltage equipment and components used for programming, data acquisition, and system adjustment from high voltage components 
  • High-voltage line-side power is isolated within its own disconnect switch enclosure
  • Accessories, such as external fold-down shelves, external data pockets, and interface flaps and extensions, allow for data retrieval, equipment monitoring, and routine maintenance to be performed externally without exposure to arc flash hazards 
  • Customizable configurations and solutions from standard components provide an unlimited choice of low-voltage and high-voltage cabinet combinations to suit your specific application

SMC Modular F.R.L.Units



New Modular Style F.R.L. Combination- AC-A Series
  • Improved flow performance
  • Better visibility and safety from Double Layered Polycarbonate bow
  • Standard back flow function to release residual air pressure
  • Easy maintenance and installation
  • Better Enviornmental Resistance


Redesigned CST EWS2 Phase Control Relay


The redesigned Crouzet 22.5 mm EWS2 replaces the existing EWS2 featuring a more compact housing, allowing modular installation.
  • Space savings, accurate measurement and optimized functions all improve the efficiency of your electrical installation
  • Control : You simply install your EWS2 phase control relay and without any adjustment you can monitor the loss or inversion of one of the phases
  • Safety : The EWS2 range enables you to choose the level of safety for your installation by using versions with 1, 2 or 3 output changeovers
  • Self-powered : Simple to install, EWS2 control relays use the controlled mains supply for their own power supply voltage
     
  • Direct replacement of existing EWS2
Features
    • 2 X 8A changeover relays
    • Multi-voltage
    • Screw terminals
    • LED status indicators
CST Technical Datasheets

CST MWS Phase Control Relay


The new Crouzet 17.5 mm MWS Phase Control Relay featuring an 8A output rating replaces both the 17.5mm MWS and 22.5mm EWS series.
  • The new MWS features:
    • 8A changeover output relay
    • Multi-voltage
    • Screw terminals
    • LED status indicators
  • The new MWS will replace existing:
    • 17.5mm Phase sequence or phase failure MWS (5A)
    • 22.5mm Phase sequence or phase failure EWS (8A)


Banner iVu Plus Gen2


A new hardware platform with more inspection capabilities now and into the future.

All iVu Plus TG Gen 2 sensors offer the option for a full resolution inspection capability to better detect small features. All iVu Plus BCR Gen 2 models offer a coarse mode option that can provide significantly faster barcode read rates, especially for 2D barcodes. This new platform also provides capability for future development of new features so the iVu can continue to improve and address even more customer needs.


  • All-inclusive image sensor with lens, light, IO and touch screen programming 
  • Ability to change parameters on the fly 
  • Supports the ability to obtain results and command rapid product changeovers over TCP/IP, EtherNet/IP or Modbus/TCP protocols 
  • Provides the capability of storing and controlling up to 30 inspections for fast product change over 


TG Models:


  • Powerful, affordable inspection solution solves a wide variety of simple and complex applications 


BCR Models: 


  • Solve a variety of linear and 2D bar code applications (BCR models) 2D Bar Codes Data Matrix (ECC200) QR & Micro QR 1D Bar Codes

Code 128 Code 39 Codabar EAN-13 (UPC-A) EAN-8 UPC-E IMB Postnet Pharmacode

Banner iVu Plus Gen2


Banner Engineering Technical Datasheets

Tuesday, July 1, 2014

TURCK's Powerfast for Process Automation



TURCK expands its powerfast line of connectivity products to include a full line of solutions for process automation applications. Designed to replace expensive, time-consuming hardwiring methods, powerfast for process automation provides a robust and reliable modular wiring solution. A full line of cordsets, receptacles, reducers, reducer tees, and power lokfast devices provides users with the ability to configure a complete power distribution system.

TURCK’s powerfast for process automation connectivity products are UL approved and available in A-Size (7/8”) and D-Size (1-3/8”) connectors and are rated for up to 30 Amps of power for a wide range of operation. Additionally, TURCK process automation powerfast products carry FM approval for use in class I division 2 hazardous locations. Offering easy installation and customization, the powerfast system delivers flexible design capabilities, quick modifications and expandable options.

“We created the process powerfast line in response to customer requests that were looking for a modular power solution for their process applications” explained Jay Bartsias, Senior Product Manager for TURCK’s connectivity division. “Now, we can offer our process customers the same convenient solution that was previously only available for factory automation applications.”

The A-size powerfast for process automation solution is IP67 rated and the D-size solution is IP67, 68, and 69k rated. Both product lines are NEMA 1, 3, 4, and 6P rated with a temperature rating up to 90 degrees Celsius.

For more information regarding the FM approval certification or control drawings for these products please visit www.turck.us/support/Approvals_certifications

TURCK is an industry leader providing superior quality sensing, connectivity and network products to help manufacturers improve their automated processes.

For other TURCK product or technical information, contact: 1-800-544-7769 • www.turck.us • usa@turck.com

TURCK Powerfast for Process Automation

TURCK's Technical Datasheets