skip to main |
skip to sidebar
Tolomatic introduces its RSH 22, RSH 25, and RSH 30 electric hygienic rod-style actuators, which deliver clean, continuous control to automation machinery.
FEATURES
- Clean-in-place (CIP) compatible to enable designers to achieve open machine designs.
- Rated IP69K to withstand high-pressure washdown for food and beverage, medical, healthcare, and pharmaceutical applications.
- Features a smooth, all-316 stainless steel exterior that resists corrosion and eliminates the need for protective shielding, as well as a replaceable front-face seal cartridge.
- Designed for forces up to 7,943lbf (35kN), speeds up to 20 inches/sec (498mm/sec), and stroke lengths up to 48 inches (1200mm); available in 22, 25, and 30 sizes.
The new UCT-TMC markers from Phoenix Contact easily clip onto the top of the E/NS 35N end bracket without the need for a separate carrier to hold the market.
FEATURES
- The size of the tag corresponds with the width of the end bracket, providing the largest possible marking area.
- A hook on one end makes it easy to remove the marker to enable access to the end bracket’s clamping screw.
- Print using Phoenix Contact’s THERMOMARK CARD, BLUEMARK ID, or TOPMARK NEO printers.
- Features a large 30mm x 8mm marking area.
Phoenix Contact UCT-TMC Markers
Phoenix Contact Technical Datasheets
Carlo Gavazzi launches the EM530 and EM540 Three-Phase Energy Analyzers, designed to assist manufacturers and end users in monitoring and managing escalating energy costs.
FEATURES
- These energy analyzers can measure most relevant instantaneous electrical variables, energy consumption, and harmonic distortion.
- Ideal for building and industrial automation applications, including cost sharing, energy analysis for energy efficiency, power metering for PV energy storage, and indoor or temperature-controlled EV charging.
- The EM530 is a Class 0.5S (kWh) analyzer which measures currents up to 10,000A via 5A current transformers.
- The EM540 is a Class 1 (kWh) analyzer which measures current up to 65A via direct connection, eliminating the need for current transformers.
Phoenix Contact’s new Cloud Client devices are industrial virtual private network (VPN) gateways designed to provide remote connectivity easily, affordably, and securely to devices and machines through the award-winning mGuard Secure Cloud.
FEATURES
- The Cloud Client is optimized for quick startup in the field, leveraging the mGuard Secure Cloud to provide users with remote access to their devices without the need for advanced networking knowledge.
- Approved for use on 4G LTE Verizon and AT&T cellular networks.
- Enables 24/7 access and control of remote machines.
- Ideal for industries such as machine building and manufacturing to provide technicians with access to remote equipment for troubleshooting and program updates.
Phoenix Contact introduces the CAPAROC customizable electronic circuit breaker system for overcurrent protection in 12V to 24V applications.
FEATURES
- Provides simple to advanced communication with PROFINET power module.
- Standard versions offer up to 10A per channel, and versions up to 4A are approved in accordance with NEC Class 2.
- Features versatile combination options, easy design-in, and simple operation to create a tailed system specifically for your device protection needs.
- All modules offered are UL 508 Listed and UL 2367 Recognized, and are available in 1-, 2-, and 4-channel options.
Opto 22’s GRV-R7-I1VAPM-3 is a groov RIO energy monitoring unit designed as an intelligent, distributed energy monitoring module.
FEATURES- Offers built-in web-based configuration, commissioning, and flow logic software—plus support for multiple OT and IT protocols.
- Provides flexibility to fit into either IIoT projects, especially those that require energy data acquisition or communications, or traditional energy management control systems.
- Simultaneously measures volts AC RMS and amps AC RMS on Category III wye (up to 400VAC) or delta (up to 600VAC) circuits.
- Includes a communications processor with two switched Gigabit Ethernet interfaces, one capable of PoE connections, supplying power to the groov RIO.
The new CPC20 ControlPlex System from E-T-A protects your 24DCV power distribution system against overload and short circuit.
FEATURES
- This solution combines the modular 18Plus power distribution system with the CPC20 bus controller and ESX60 electronic circuit protectors to enable system designers to maximize uptime, improve protection, and increase system flexibility.
- The ESX60D electronic circuit protector continuously records the load current and the load voltage of a system and are bundled by the CPC20 bus controller to transmit to the connected control system, enabling system operators to detect changes or aberrations at an early stage.
- Prevents unplanned system downtimes, improves transparency, and stabilizes the production process.
- Modular terminal block system provides flexibility in system planning.
The XS26-ISDd Safety Controller from Banner Engineering is now available with built-in In-Series Diagnostics to simplify installation.
FEATURES
- Provides comprehensive real-time data about automation safety equipment to prevents and reduce downtime.
- Enables users to configure and monitor up to 394 connected safety devices, such as E-stop buttons, safety switches, safety light screens, two-hand controls, and rope-pull switches.
- Controls up to 68 independent safety outputs.
- Offers a cost-effective solution to meet machine-safeguarding requirements, with the flexibility to grow with expanding production and future technology enhancements.
Banner Engineering XS26-ISDd Controller
Banner Engineering Technical Datasheets
Banner Engineering introduces new 7- and 8-foot IP65-rated light curtains to its LS-S series.
FEATURES
- Provides a 10-meter detection range is ideal for safeguarding large areas in manufacturing, material handling, and packaging environments.
- Designed to be highly visible, intuitive to use and align, and free of blind zones.
- Features a sturdy 3-millimeter-thick aluminum housing.
- Dual-scan technology makes the sensor immune to EMI, RFI, ambient light, welding flashes, and strobe lights.
The new HLS28 Hazardous Location LED Strip Lights from Banner Engineering feature a sturdy aluminum housing, shatterproof windows, and a space-saving design.
FEATURES
- Nine single-color models and three multicolor models come in lengths from 145mm to 570mm.
- Available with integrated motion sensor for auto-on when the enclosure door is opened, or when motion is detected.
- Single-color models have High/Low/Off dimming capability for additional energy savings and customization.
- Triple certification cULus, ATEX, and IECEx for global use inside appropriately rated enclosures.
Advantech Automation’s new IMC-595 media converter can serve as a fiber-to-Ethernet media converter, a 90W PoE injector, and a light management Ethernet switch.
FEATURES
- This compact, industrial-grade solution comes with 2 x Gigabit 90W PoE ports in a compact housing.
- An ideal solution for users seeking to update network infrastructure, expand network coverage distance, or pursue light network management functions.
- Its fiber and RJ45 connectivity enable it to convert between fiber and copper cables, and the RJ45 ports can deliver 90W power and Gigabit data on the same cable to two devices.
- Supports LLDP and Modbus TCP protocols, and Jumbo Frames up to 9,216 bytes and Broadcast Storm Control ON/OFF.
