Phoenix Contact PTVME 6/S Test Disconnect Block

The PTVME 6/S test disconnect terminal blocks from Phoenix Contact short out circuits tied to current transformers or transducers to enable tests and measurement readings.

 
FEATURES

• Features a simple, touch-safe method to actuate the disconnect lever.
• Conductor side-entry allows for clear marking and wire identification.
• Push-in connection delivers fast, reliable, and safe operation of test disconnects.
• 600V, 30A, 26-10AWG per UL recognition; Available in gray, blue, red, green, and yellow.

Phoenix Contact PTVME 6/S Test Disconnect Block

Phoenix Contact Technical Datasheets

Opto 22 GRV-MM1001-10 I/O Module

 

Opto 22’s new GRV-MM1001-10 module for its groov edge programmable industrial controller provides engineers the flexibility to quickly connect most traditional I/O signals or circuits without specifying precise sensing requirements in advance.

FEATURES  

• Software-configurable universal I/O module accepts more than a dozen signal types.
• Features 10 channels per module: 8 multifunction, mixed signal; 2 mechanical relays.
• Supports more than 200,000 unique I/O configurations via eight multifunction, multi-signal I/O channels, including thermocouples (TCs), integrated circuit temperature devices (ICTDs), and thermistors/resistors.
• Features signal-quality indicators and intelligent functions such as scaling, averaging, and totaling.

Opto 22 GRV-MM1001-10 I/O Module
Opto 22 Technical Datasheets

Phoenix Contact RIFLINE Relay

Phoenix Contact’s RIFLINE family of pluggable force-guided relays has expanded to include 4-pole designs in a narrow, space-saving design.

FEATURES

• Increased safety with force-guided contacts in accordance with EN50205.
• Integrated status LED and freewheeling diode.
• Switching currents up to 4 x 6A.
• Available in a 2N/O + 2N/C or 3N/O + 1N/C contact arrangement.

Phoenix Contact RIFLINE Relay

Phoenix Contact Technical Datasheets

Banner Engineering DXMR90 Industrial Controller

The new DXMR90 industrial controller from Banner Engineering combines sensor signals into a unified data stream.

FEATURES  

• Contains individual Modbus Clients enabling concurrent communication to up to five independent serial networks.
• Converts Modbus RTU to Modbus TCP/IP, Ethernet I/P, or Profinet.
• Features four female M12 ports, which can receive native Modbus signals or can be connected to Banner radios to receive wireless signals from as far as six miles away.
• Ideal for Industrial Internet of Things data analytics, condition monitoring, predictive maintenance, OEE analysis, diagnostics, and troubleshooting.

Banner Engineering DXMR90 Industrial Controller

Banner Engineering Technical Datasheets

Opto 22 GRV-IVAPM-3 Power Monitoring Module

Opto 22 announces the GRV-IVAPM-3 I/O module for its groov edge programmable industrial controller.

FEATURES  

• Captures Category III AC voltage, current, energy, and power measurements.
• Facilitates preventive and predictive maintenance and energy optimization cost-saving initiatives.
• Separately measures up to three different single-phase brand circuits from the same service or a single 3-phase wye (up to 400VAC) or delta (up to 600VAC) circuit.
• Accumulated values are preserved in non-volatile memory every 30 seconds to survive power interruption, and signal accuracy can be tuned for each phase using the minimum voltage threshold ratio, minimum current threshold ratio, and power creep adjustment properties.

Opto 22 GRV-IVAPM-3 I/O Module

Opto 22 Technical Datasheets

Phoenix Contact Axioline P Modular Proxy

The Axioline P modular proxy from Phoenix Contact combines two major functions: modular connectivity to various networks and protocols, as well as the ability to add additional standard and intrinsically safe I/O.

FEATURES  

• Modular proxy enables up to 8 PROFIBUS PA segments to the available AF bus interface.
• Digital I/O supports NAMUR sensor types ideal for intrinsically safe environments; Analog modules can activate HART communication if supported.
• Minimizes rail usage and reduces Ethernet nodes communicating back to the Distributed Control System.
• Modular block design is easy to customize; select and use only the necessary components.
• Reliability assured and supported for S2, R1, and R2 system redundancy; CE, UL, EX, Marine, and Class A certifications.

Phoenix Contact Axioline P Modular Proxy

Phoenix Contact Technical Datasheets

Banner Engineering Mini-Array Basic Light Sensor

Banner Engineering’s new Mini-Array Basic light curtain is a streamlined, affordable light sensor.

FEATURES

• Includes a pair of sensor emitter/receiver arrays configured for material handling and logistics applications; an auto-streaming feature automatically transmits measurement data without the need for a separate controller.
• Features sensors with a 2m-detection range, with beams spaced 19.1mm apart.
• Can be set to straight or interlaced scanning patterns to optimize speed or the resolution of the detection field.
• A budget-conscious solution for box profiling, edge guiding, parts ejection, and hole detection applications.
• Available with array lengths from 150mm to 1210mm, in 150mm increments.

Banner Engineering Mini-Array Basic Light Sensor

Banner Engineering Technical Datasheets