Phoenix Contact PLT-SEC Surge Protection Family

Phoenix Contact PLT-SEC Surge Protection Family Phoenix Contact continues to expand its product portfolio of reliable surge protection products. The latest additions are redesigned versions of our PLT-SEC product family. This product family has been revamped, and the 120 V AC product now has a UL Type 2 Listing. The UL Listing will enable much smoother integration of products into new and existing applications while also saving time and money. This is a big advantage for UL 508A panel shops. 

This new design maintains its slim 17.7-mm DIN rail footprint. In addition, this product still offers both local and remote status indication. The remote status contact is also now terminated on a pluggable connector for easier wiring and installation. The popular pluggable, hot-swappable capability is also a key feature for this new design, which enables easier maintenance.

Phoenix Contact PLT-SEC Surge Protection Family

Phoenix Contact Technical Datasheets

Banner Engineering's SC10 Series Safety Controllers

Banner Engineering's SC10 Series Safety Controllers are cost-effective, easy-to-use safety controller for smaller machines replaces the functionality of two or more safety relay modules and features an intuitive user interface and advanced diagnostic capabilities.

FEATURES

• Intuitive, icon-based programming with drag-and-drop PC configuration simplifies device setup and management


• Supports a wide range of safety devices, eliminating the need to buy and stock safety relay modules dedicated to specific safety devices


• Two safety six amp relay outputs each with three N.O. sets of contacts


• Ten inputs, including four that can be used as non-safe outputs


• Automatic Terminal Optimization (ATO) can increase inputs from 10 up to 14


• Industrial Ethernet two-way communication enables 256 virtual non-safe status outputs and 80 virtual non-safe inputs (reset, on/off, cancel off-delay, mute enable.)


• SC-XM3 external drive for fast swap and quick configuration without a PC

Banner Engineering's SC10 Series Safety Controllers Press Release

Banner Engineering Technical Datasheets

Phoenix Contact Modbus TCP/RTU to EtherNet/IP gateway

Phoenix Contact Modbus TCP/RTU to EtherNet/IP gateway makes migration painless, with easy and intuitive web-based configuration for mapping Modbus data over the EtherNet/IP. RSLogix integration is a breeze thanks to the “write-to-tag” feature, allowing you to quickly set up the transfer of data into the programming environment. Variants are available with one, two, or four serial ports and one or two RJ45 Ethernet ports. The devices feature a wide operating temperature range of -40 to +70 degrees Celsius and hazardous-area approvals, making them suitable for use in any industry.

FEATURES

• Support for common industrial protocols including EtherNet/IP, Modbus, Profinet, and HART


• Multiple variants with different interfaces to meet your application needs


• Simple and intuitive web-based configuration and easy control system integration


• Industrial grade with wide input supply voltage range 10.8 V DC ... 30 V DC


• Hazardous location approvals Class I, Div. 2, Groups A, B, C, D

Phoenix Contact Modbus TCP/RTU to EtherNet/IP gateway Press Release

Phoenix Contact Technical Datasheets

Banner Engineering TL50 Pro Tower Light

Banner Engineering TL50 Pro Tower Light are self-contained tower lights that provide you with custom indication by combining the vast color options provided by RGB LEDs with the versatile control capabilities offered by either Pro Editor software compatibility or IO-Link communication.

FEATURES

• The TL50 Pro series allows users to configure color, flashing, rotation, and light intensity


• Pro Editor-compatible models allow users to choose from predefined colors and program devices in the field without requiring IO-Link


• Models with IO-Link communication enable almost limitless capacity for custom indicatio


• Rugged, cost-effective, and easy-to-install


• High-visibility, at-a-glance operator guidance and status indication


• Available in black or light gray housing to match different machine styles


• Audible models available with standard, sealed, or omni-directional audible element


• Compact and beacon models are shorter and have a more intense display than standard models


• Pro series tower lights provide classic segment control as well as advanced status indication that adds nuance to the visual factory

Banner Engineering TL50 Pro Tower Light Press Release

Banner Engineering Technical Datasheets

Banner Engineering PTL110 Series

Banner Engineering PTL110 Series pick-to-light devices are multifunctional indicators with options for touch button, optical sensor, and three-digit display, connected in series to create a powerful picking system. With fast response times and flexible installation options, PTL110 systems improve speed, productivity, and quality in picking, kitting and related applications.

FEATURES

• Models available with optical and touch sensor capabilities.


• Optional 3-digit alphanumeric display can be used to indicate part count or provide other instructions.


• M12 connectors for quick and secure installation of multiple devices with no additional cables required.


• Indicator provides fourteen colors and multiple animation functions to differentiate multiple conditions.


• Powered by PICK-IQ™, a purpose-built, Modbus compatible serial bus protocol that uses a Common ID to reduce the typical latency that results from polling multiple devices.


• Can be paired with the DXM700 wireless controller for deployment on carts and mobile picking stations.

Banner Engineering PTL110 Series Press Release

Banner Engineering Technical Datasheets

Banner Engineering All-in-One Pressure Sensor and Wireless Node

Banner Engineering All-in-One Pressure Sensor and Wireless Node make it easy to monitor critical pressure levels on systems and equipment in remote and hard-to-access locations without the hassle and expense of installing, altering, or expanding wired infrastructure to connect devices.

FEATURES

• Combines a media isolated pressure sensor, a Performance Series wireless node, and a battery power supply


• Compact, one-piece design simplifies installation and eliminates the need for ordering multiple components


• Integrates easily in applications where infrastructure, movement, or mobility make wired solutions impractical, ineffective, or cost-prohibitive


• Field-proven, Sure Cross wireless architecture ensures secure, reliable communication between devices

Banner Engineering All-in-One Pressure Sensor and Wireless Node Press Release

Banner Engineering Technical Datasheets

Carling Technologies ST Series IP68 Sealed Toggle Switch

Carling Technologies ST Series IP68 Sealed Toggle Switches are one and two pole sealed toggle switches, featuring a toggle seal composed of dynamic silicone material that bonds to the metal toggle, pin and bushing, providing ideal sealing and protection against the environment, vibration and shock, while withstanding extreme temperature variations. It also utilizes up to three terminal seals per pole and an optional o-ring assures additional under panel sealing protection. All silicone seals on the ST-Series comply with A-A-59588 for silicone rubber performance specifications and, together, these features meet the international IEC 60529 standard for sealing performance to an IP68 level, and comply with MIL-DTL-3950G requirements.

Carling Technologies ST Series IP68 Sealed Toggle Switch Press Release

Carling Technologies Technical Datasheets 

Banner Engineering new capabilities for iVu Series Vision Sensors

Banner's new capabilities for iVu Series Vision Sensors comes with the latest version of Vision Manager software and is packed with new capabilities that make it easy to build better inspections and solve more applications.

FEATURES

• Match Eraser: Remove pixels from a taught pattern without stopping inspections to teach a new image. Imperfections and unnecessary details, like the scuffs inside the Banner logo (above left) can be erased from the taught pattern. During inspection they are ignored (above right) and will not affect the pass/fail criteria.


• Match Search ROI: Find a specific part or feature in a specific location in the region of interest (ROI). Use this tool to verify presence and position in one inspection.


• Motion with Match: Expands Motion capabilities by making it possible move or rotate ROIs by either Match or Edge.


• Area Sensor Total Area: Measures the total area of objects in the ROI to verify that parts and features are within specific size guidelines. Available with the Area and Color Area sensor types.


• Average Color Tests: Pass or fail inspections based on specific RGBI/HSI color values. This builds on the ability to export color values over Ethernet or serial.

Banner Engineering new capabilities for iVu Series Vision Sensors Press Release

Banner Engineering Technical Datasheets

Pro-face Atom Box IPC

Pro-face PS5001b Atom Box IPC unit offers an efficient, yet high performance processor. It can used as a node box unit, or paired with any of our PS5000 series displays to create a high quality visualization, application management system.

FEATURES

• Fan-less design


• Modular Flexible Design


• Can be used with multiple screen sizes

Pro-face Atom Box IPC Press Release

Pro-face Atom Box IPC Technical Datasheets

Banner Engineering K50 Pro Compact Indicator

Banner Engineering K50 Pro series programmable indicator lights come in a 50 mm dome or flat window provides bolder, brighter status indication and is available with either Pro Editor software compatibility or IO-Link communication for additional versatility and customization.

FEATURES

• The K50 Pro Series multicolor indicator allows you to configure color, flashing, dimming, and advanced animations like rotation, strobing, 2-color display, 2-color rotation, 2-color flashing, and chase.


• Pro Editor-compatible models allow you to choose from predefined colors and program devices in the field without requiring IO-Link.


• Models with IO-Link communication enable almost limitless capacity for custom indication.


• Standardize on fewer models that can be customized in-field, saving costs and inventory requirements


• Rugged IP66, IP67, and IP69K polycarbonate housing protects against impact and withstands high-pressure, high-temperature washdown


• Models constructed from FDA-grade materials available for use in food and beverage applications


• Simple wiring plan enables easy setup and reduces the time and expense required for installation


• An optional audible alarm provides a distinct, loud notification of status

Banner Engineering K50 Pro Compact Indicator Press Release

Banner Engineering Technical Datasheets