Crydom SeriesOne DR Solid State Relays

Crydom' SeriesOne DR solid state relays incorporate proprietary thermal management technology resulting in exceptional output ratings of 6 and 12 amps at 40° ambient in compact 11 and 18mm wide DIN rail mounted housings. Ideally suited for heating, lighting or motion control applications where DIN rail space may be limited, the unique design provides both greater power density than previously available in DIN rail mounted solid state relays, and greater safety for personnel by eliminating exposed hot metal surfaces typical of SSRs utilizing external heat sinks to attain comparable ratings.

Order Crydom Literature

Honeywell Sensing and Control 225mm Linear SMART Position Sensor

Superior Measurement. Accurate. Reliable. Thinking.

The SMART Position Sensor 225 mm Linear Configuration is Honeywell Sesning and Control's second non-contacting linear position sensor, joining the SMART Position Sensor 75 mm Configuration that was introduced in December 2009. They sense the position of a magnet relative to a sensor in the following sensing ranges:

• 225 mm configuration: 0 to 225 mm [0 to 8.86 in]
• 75 mm configuration: 0 to 75 mm [0 to 3.0 in]

Honeywell's SMART Position Sensors are one of the most durable, adaptable and lightweight linear position devices available in the industry today. Their simple, non-contact design eliminates mechanical failure mechanisms, reduces wear and tear, improves reliability and durability, enhances operation efficiency and safety, and minimizes downtime.

Honeywell Sensing and Control 225mm Linear SMART Position Sensors

Honeywell Sensing and Control Technical Datasheets

Honeywell Sensing and Control WLS Heavy-Duty Wireless Limit Switches

Introducing the new Limitless™ WLS Heavy-Duty Wireless Limit Switches, the latest in Honeywell Sensing and Control's series of wireless limit switches, combining the best of MICRO SWITCH™ HDLS heavy-duty limit switches with the latest wireless technology. Limitless™ Series switches have the same durable design, temperature ratings, and sealing as standard MICRO SWITCH™ limit switches, but they're wireless. Wireless offers advantages over traditional wired switches by reducing total installed costs as there are no wires to install, no wear-and-tear to mend, and no cords to ever replace. The Limitless™ Series allows for increased flexibility for temporary, remote, permanent, and reconfigurable installations.

Honeywell's Limitless™ WLS Wireless Switch uses a global, license-free RF wireless 802.15.4 WPAN protocol, and has up to a 305 m (1000 ft) line-of-sight communication range, yet consumes low power to prolong battery life. It also features an EN 50041 metal enclosure for operation in tough environments and conforms to IP67 and NEMA 1, 3, 4, 6, 6P, 12 and 13 standards.

Honeywell Sensing and Control WLS Heavy-Duty Wireless Limit Switches

Honeywell Sensing and Control Technical Datasheets

Carling Technologies G-Series Hydraulic Magnetic Circuit Breaker

Carling Technologies is pleased to announce the release of the new G-series, hydraulic magnetic circuit breaker. This product is designed for use in DIN rail applications, and is suitable for domestic and international use as it meets IEC spacing requirements (TUV/CCC approvals pending) and has UL 1077 and CSA agency approvals. The G-series is rated up to 63 Amps, has a conventional 17.5 mm form/fit DIN rail breaker housing and is available in 1 to 4 poles

Features:

• Optional integrated auxiliary switch embedded within the breaker. The optional auxiliary switch does not require a separate housing, or pole. As a result, the G-series takes up less panel space than the other brands.
• Utilizes hydraulic/magnetic technology, which provides precise circuit protection operation and performance even when exposed to extremely hot and/or cold application environments. Many other DIN rail breakers utilize a thermal bimetal element requiring a de-rating factor to prevent nuisance tripping in hot environments, or a potentially destructive long delay in cold environments.

Carling Technologies G-Series Hydraulic Magnetic Circuit Breaker

Carling Technologies Technical Datasheets

Pepperl+Fuchs GLV18 Photoelectric Sensors with Background Suppression

Pepperl+Fuchs GLV18 Series photoelectric sensors are now available in Background Suppression models. Background suppression models feature a mechanically adjustable sensing range cut-off that enables precise detection of all colors at distances up to 120 mm. Black and white test objects are seen to within 6% of the same distance, as opposed to a standard diffuse mode sensor in which sensing ranges for black and white test objects can vary by around 80%. They come in an industry-standard M18 threaded cylindrical housing that is up to 50% shorter and with up to 50% lower power consumption than many competitive models. These sensors carry the CE mark, and are UL/cUL Listed.

“The primary benefit of background suppression models is their ability to ignore objects that appear beyond the object to be detected. For example, a background suppression sensor can detect corrugated cardstock to be printed without detecting the machine panel below the cardstock. This means more precise and reliable sensing without the need for a reflector, or the need to frequently re-adjust a sensors’ sensitivity,” says Jeff Allison, Product Manager. “Background suppression also has very low color sensitivity, meaning an object with changing print, color, or reflectivity is detected at a very consistent distance without the need for re-adjustment or re-positioning.”

Every GLV18 sensor includes a flush-mount bracket that allows for a simple, tool-less, unobtrusive means of mounting the sensor on a conveyor. Ball-and-swivel and half-clamp mounting brackets are also available to facilitate precise positioning of GLV18 sensors. GLV18 models are also physically much shorter than competitive versions, meaning they are more likely to fit into space-critical equipment or installations.

“When mounted through the sidewall of a conveyor, for example, the GLV18 protrudes less than other M18 cylindrical sensors, so conveyors or equipment can be placed closer together and ultimately consume less space,” explains Allison.

GLV18 sensors consume up to 50% less current than other M18 cylindrical photoelectric sensors, so it costs less to operate each sensor. Lower power consumption enables each power supply to power more sensors, so fewer power supplies may be needed. In fact for long conveyor runs, GLV18 users can potentially cut the number of required power supplies in half.

Status LEDs are highly visible and placed in dual positions, 180 degrees apart on the housing, for increased visibility.

The series is ideally suited for use in material handling applications, primarily as a conveyor sensor for the reliable reflector-less detection of cartons, totes, or cases through the side-wall of a conveyor. They are also well suited for use in packaging applications including, among others, web break detection and carton magazine low-level detection. The GLV18 is a very reliable general purpose sensor that can also be used in a number of other markets, including printing/paper and automotive.

Pepperl+Fuchs is a world leader in the design, manufacture and application of high quality factory and process automation products and services. Pepperl+Fuchs pioneered the development of proximity sensors 50 years ago, and has set the standard for innovation and quality ever since.

Pepperl+Fuchs, 1600 Enterprise Parkway, Twinsburg, OH 44087; (330) 486-0001; fax: (330) 405-4710; fa-info@us.pepperl-fuchs.com; www.pepperl-fuchs.us.

Pepperl+Fuchs GLV18 Photoelectric Sensors

Pepperl+Fuchs Technical Datasheets

IDEC HG3G Operator Interface Touchscreens

Sharp Displays with Excellent Clarity, Brightest in the market
The HG3G series of touchscreens by IDEC are high definition TFT LCD displays with a resolution of SVGA 800x600 pixels. With 65,536 available colors to provide realistic images and the brightest displays in the market (8.4” – 600 cd/m2, 10.4” – 700 cd/m2) these screens provide clear, sharp and bright displays, even in environments with low light.

Fast 400 MHz CPU Processor
Operations are quick and command response time is immediate with the HG3G Series. In addition, the touchscreens startup within 3 seconds, improving productivity and allowing faster access to critical programs or problem identification.

12MB User Memory
The HG3G screens have 12 MB of internal memory to store large complex projects. If additional storage is needed, an SD card or USB flash drive can be used.

Audio Out
An external speaker with built-in amplifier can be attached to the HG3G to provide sound output. For example, sound can be used to alert someone for faster system recovery when a problem occurs on the plant floor. In addition, use pre-recorded messages as a voice guidance system for more efficient operations.

Easy I/O Control
Up to 2 Microsmart digital I/O modules can be mounted on one HG3G, eliminating the use of a PLC and saving space in the panel. This also means that the project programming can all be done in the operator interface, utilizing parts and scripts to do simple I/O control.

Note: The 10.4" models will be available by November 2010.

IDEC HG3G Operator Interface Touchscreens

IDEC Technical Datasheets

IDEC LH1D Jumbo Dome LED Spider Lights

IDEC introduces the LH Jumbo Dome series of LED Spider Lights. Best for mounting on the surface of equipment or panels, these lights provide excellent visibility from the front and the side!

LH spider lights can be used in various applications that do not have space behind the panel.
These include robotic arms, product picking, door monitoring and other applications. You can choose dual-color or tri-color pre-wired LED spider lights rather than drilling holes to mount
multiple pilot lights.

Offered in seven bright colors (amber, blue, green, pure white, white, red, yellow), these 24V AC/DC Jumbo Dome Spider Lights maintain an impressive 50,000 hour lifespan while consuming low amounts of energy. Two-color alternate illuminations are available giving you a 2-for-1 option. A red/green/white three-color option gives them even more choices, creating a space-saving alternative to using a multiple tiered light.

LH Series of lights are c-UL-us listed, CE marked and TUV rated. All Spider Lights are also IP67 rated for protection against exposure to water. Direct cable wiring ensures these waterproof characteristics. LH Jumbo Dome Spider Lights are available with 1, 3 and 5m cables or with an M12 connector.

IDEC LH1D LED Spider Lights

IDEC Technical Datasheets

Schneider Electric Altivar 32 Variable Speed Drive

The Altivar 32 variable speed drive by Schneider Electric has a slim, book-style footprint, side-by-side mounting capability and the ability to accept a self-protected disconnect to reduce panel space and wiring costs.

Schneider Electric Technical Datasheets

Steven Engineering YouTube Channel

Schneider Electric Premium 30 Energy Efficient Transformers

Schneider Electric’s Premium 30 Energy Efficient Transformers are designed to exceed minimum efficiency program standards—giving you optimum performance and superior quality you expect from Square D® products.

Incorporate these NEMA PREMIUM program-approved, low voltage transformers to reduce energy consumption and contribute to LEED® certifications in commercial, industrial and institutional facilities.

Features & Benefits:

• NEMA PREMIUM Compliant — complies with NEMA Premium Efficiency Transformer Program specifications.
• Energy Efficient — Contributes to LEED® certification through reliable reduction in energy.
• Easy to Spec & Install — Mounting dimensions consistent with Square D TP1 and General Purpose Transformers.
• Safe & Reliable — All units tested per NEMA ST-20 and NEMA TP-2 requirements in a laboratory that participates in UL's Client Data Test Program (UL File DA643).
• Compact Footprint — 3” clearances from all ventilated openings require less overall installation floor space compared to the industry standard of 6”.
• Intuitive Design — Terminal location and wiring compartment designs meet the National Electrical Code bending requirement.

Square D Premium 30 Energy Efficient Transformers Available:

• Distribution Transformers
• Three Phase 15 to 1000kVA
• Non-Linear Transformers
• K-9 and K-13 options
• Three Phase 15 to 750kVA
• Harmonic Mitigating Transformers
• 0° and 30° Phase Shift
• Three Phase 15 to 750kVA

Schneider Electric Premium 30 Energy Efficient Transformers

Schneider Electric Technical Datasheets

Turck JBBS Junction Brick for AS-Interface Now FM Approved

TURCK announces that the company’s JBBS junction bricks for AS-interface® networks are now FM approved for Class I, Division 2, Groups A, B, C and D hazardous locations. JBBS junction bricks simplify the connection of multiple field devices and can be mounted directly on the machine in hazardous environments, with no enclosure required.

These bricks include options with 4, 6 or 8 short-circuit protected ports that can be shut off via integrated dip switches located under the cover of the station. This design allows users to service the device while maintaining normal operating conditions in the hazardous area, minimizing downtime. This shut-off feature is the preferred method in order to minimize disruptions to the network.

The IP69K-rated JBBS junction bricks are available with M12 or 7/8-16UN connectors in stainless steel or nickel-plated brass.

Turck JBBS Junction Brick

Turck Technical Datasheets

Red Lion Controls PAX2A Dual Line Display Meter

Red Lion Controls' new PAX2A dual line display meter features all of the award winning advanced functions of their original PAX meters, and more. It has a display featuring a 6 digit, 0.7" (18 mm) top line and 9 digit, 0.35" (9 mm) bottom line. This allows the top to display the process function while the bottom line has plenty of room to totalize large numbers. The backlight LCD allows the top line to be programmed to display in orange, red and green. The programmable setpoint outputs can also control the color of the display, providing an operator with a visual indication of machine changes. The unit also includes a 3 digit programmable custom unit indicator.

Red Lion Controls Technical Datasheets

Steven Engineering YouTube Channel

Red Lion Controls PAX2A Dual Line Display Meter

Red Lion is pleased to announce their all new PAX2A dual line display meter. This new meter features all of the award winning advanced functions of their original PAX meters, and more. It has a display featuring a 6 digit, 0.7" (18 mm) top line and 9 digit, 0.35" (9 mm) bottom line. This allows the top to display the process function while the bottom line has plenty of room to totalize large numbers. The backlight LCD allows the top line to be programmed to display in orange, red and green. The programmable setpoint outputs can also control the color of the display, providing an operator with a visual indication of machine changes. The unit also includes a 3 digit programmable custom unit indicator.

The PAX2A features a universal signal input that accepts DC current, DC voltage, process signals, thermocouples and RTD temperature sensor inputs. The universal power supply can accept 50 to 250 VAC or 21.6 to 250 DC power. The PAX2A provides the maximum in application flexibility, allowing for a reduction in the number of meters that need to be stocked.

Additional features include a built-in USB programming port, easy PAX-style programming, meter update rates at 160 updates/second, and built-in standard communication using Modbus protocol. Add to all of this access to the wide variety of PAX option cards and one has the most flexible meter in the world. The field installable cards provide dual and quad relay outputs, retransmitted analog out and communications, including RS232, RS485, DeviceNet and Profibus.

Red Lion Controls PAX2A Dual Line Display Meter

Red Lion Controls Technical Datasheets

Pepperl+Fuchs AS-Interface I/O Modules with Advanced Diagnostic Features

Pepperl+Fuchs popular KE-style enclosure-mount AS-Interface I/O modules are now available with advanced diagnostic features to help minimize troubleshooting and maximize run-time. With these redesigned modules, should an output wire be disconnected, switchable lead breakage detection automatically sends the peripheral fault signal to the upper level controller. Any input pulse or noise spike of less than 2 ms is automatically filtered out by input pulse suppression. Advanced diagnostic LEDs alert the user to reverse polarity, overload or short circuit conditions that corrective action can be quickly taken.

The KE-style AS-Interface modules feature 4 inputs and 4 outputs, and boast a narrow 22.5 mm housing ideal for cramped enclosures, and that includes removable, mechanical and color coded terminals for easy installation. Additional features include:

• Communication monitoring
• Inputs for 2- and 3-wire sensors
• Addressing jack
• Power supply of outputs from the external auxiliary voltage
• Selectable supply to the sensors: external or from the module
• Function display for bus, external auxiliary voltage, internal sensor supply, inputs and outputs

AS-Interface is a simple wiring replacement technology that allows a single 2-wire cable to carry up to 248 inputs and 248 outputs. Enclosure-mount I/O modules are used to connect sensors and actuators to AS-Interface, and are ideal for tight enclosure applications.

Pepperl+Fuchs is a world leader in the design, manufacture and application of high quality factory and process automation products and services. Pepperl+Fuchs pioneered the development of proximity sensors 50 years ago, and has set the standard for innovation and quality ever since.

Pepperl+Fuchs, 1600 Enterprise Parkway, Twinsburg, OH 44087; (330) 486-0001; fax: (330) 405-4710; fa-info@us.pepperl-fuchs.com; www.pepperl-fuchs.us.

Pepperl+Fuchs KE-Style AS-Interface I/O Modules

Pepperl+Fuchs Technical Datasheets

Turck Absolute Miniature Encoders

TURCK announces that the Kübler by TURCK 2450 shaft and 2470 hollow shaft miniature encoders are now available in absolute versions. The encoders boast a 24 mm diameter housing that makes them ideal for space-restricted areas, with a non-contact design that minimizes wear—delivering exceptional ruggedness in a compact package.

Rather than determining encoder position based upon the home position, as incremental varieties do, 2450 and 2470 absolute encoders assign a unique output for each position. With this design, the encoders retain specific position data, even if equipment power is turned off.

All 2450 and 2470 miniature encoders deliver a maximum speed rating of 12,000 RPM, plus an extensive temperature range of -20 to 85º C to suit diverse plant environments. With radial and axial cable outlet options, these compact encoders demonstrate even further applicability in tight spaces.

Turck Technical Datasheets

Rittal Floormount Disconnect TS8 Enclosures

Rittal's disconnect floormount TS8 couples the strength of unibody floormount enclosures with the flexibility of Rittal's modular freestanding TS8 offerings.

This double door cabinet is perfectly suited for applications that require wash down of the floor or need conduit entry into the bottom of the enclosure. The Rittal disconnect floormount TS8 uses 14 gauge, internally fastened skins for added durability and security and stands on 12 inch legs. The left hinged doors use 180-degree hinges and utilize a pad-lockable Comfort handle with pushbutton insert.

Rittal Floormount Disconnect TS8 Enclosures

Rittal Technical Datasheets

Banner Engineering WORLD-BEAM QS30 Mid-Size Adjustable-Field Sensors

Banner Engineering has added a mid-size range to their WORLD-BEAM QS30 line of adjustable-field sensors. These sensors complement the QS18AF short-range and Q60LAF long-range sensors.

FEATURES

• 128 element photo receiver for superior performance on varying colors and textures
• Sensing range in midsize QS30 housing
• QS30AFF400 – 400 mm (6% Black Card)
• QS30AF600 – 600 mm (90% White Card)
• Suppression:
• QS30AFF400 - Foreground suppression for reliable detection with a fixed background is present and object color or shape varies
• QS30AF600 – Background suppression models for reliable detection of objects when the background condition is not controlled or fixed
• Linear multi-turn screw adjustment for cutoff distance
• Enhanced immunity to fluorescent lights
• Crosstalk immunity allows two sensors to be used in close proximity
• Tough ABS housing is rated IEC IP67; NEMA 6
• Bipolar discrete outputs, PNP and NPN
• Models available with 2m or 9 m (6.5’ or 30’) cable or integral metal quick-disconnect; or 150mm (6”) pigtail
• Mounting versatility via popular 30 mm threaded barrel or side mount
• Large, bright output indicator

Banner Engineering WORLD-BEAM QS30 Mid-Size Adjustable-Field Sensor

Banner Engineering Technical Datasheets